Advance Data Sheet: Maxeta
TM
iFA Series
©2005 TDK Innoveta Inc.
iFA Advance Datasheet 6/6/2005
℡
(877) 498-0099
1/18
Maxeta iFA Series DC-DC Power Modules
24V Input, 28V Output, 602W Full Brick
The Maxeta
iFA series power modules are
ideally suited for wireless applications to power
RF power amplifiers. With a typical 89% full
load efficiency (90% at 80% load), a power
density of 108W per cubic inch and a total
power and current output capability of 602W
and 21.5A respectively, the Maxeta
Series
offers the highest efficiency, power density and
usable output power for 24V input applications
in a standard full brick package currently
available. A wide output voltage trim range, -
40% to +10%, remote sensing, and isolated
remote on/off control are standard features
enhancing versatility. The Maxeta
iFA series
power modules are also suited for other
telecommunication applications.
Standard Features:
•
Industry Standard Full Brick
•
Power density: > 108W / cubic inch
•
High efficiency: up to 92%
•
Nominal input efficiency: 89% at 100% load
•
Nominal input efficiency: 90% at 80% load
•
Up to 602W of output power in high ambient
•
Meets basic insulation requirements
•
Voltage foldback constant current limit
•
Start-up into pre-biased output bus
•
User selectable on/off (either positive or
negative logic)
•
Wide output voltage adjustment range
•
Auto-recovery protections:
o
Input under and over voltage
o
Short circuit
o
Thermal limit
•
Latched output over-voltage protection
•
High reliability open frame, SMT construction
•
Base-plate for improved thermal management
•
Constant switching frequency
•
UL 60950 (US and Canada), VDE 0805, CB
scheme (IEC950)
•
CE Mark (EN60950)
•
EMI: CISPR 22 Class A/B with external filters
•
US 6,618,274. Other patents pending
•
ISO Certified manufacturing facilities
Optional Features:
•
Short Thru-hole pin 2.794mm (0.110”)
•
Thru-hole PEM studs for ease of mounting
•
Single wire current sharing (optional)
•
Power good Indication (optional)
•
Auxiliary logic (10V) output (optional)
