TabTimer™ helps keep medications on time™ |
www.TabTimer.com.au
| 1300 TAB TIMER
(1300 822 846)
Pricing and specifications are correct at the time of publishing and may change without notice. Your health professional should be consulted prior to using any TabTimer
product to establish the suitability of a TabTimer product for use, administration or storage of any medications. In purchasing and continuing to use our products you have
agreed to and accept the Terms and Conditions shown on our website. Images are for illustration purposes only. Errors and omissions excluded.
TabTimer™, 'helps keep medications on time™' and the TabTimer™ logo are registered trademarks of TabTimer Pty Ltd © TabTimer Pty Ltd ABN: 99 137 415 948
IMPORTANT: PLEASE READ
TIPS FOR EFFECTIVE USE OF THE AUTOMATED PILL DISPENSER
*** If you use a pharmacy or carer to fill the device please ensure they also read this sheet.
Lock & Key
When You receive the device it will be unlocked with the key inside
To open the lid put your pointer finger through the opening in the lid,
and press and lift with your thumb on the outside
DO NOT BREAK THE LOCK!!
To lock and unlock, gently turn the key ¼ turn only.
Towards the ‘O’ to OPEN or Towards the ‘L’ to lock
The lock has a tamper resistant feature, if the lock is over turned backwards
and forwards, the wrong way, or someone attempts to break into the device,
the lock WILL break
.
We cannot repair the lock if it is broken. A replacement device will be necessary
Breaking the lock will be caused by incorrect operation of the lock
THE LOCK IS NOT COVERED BY ANY REPLACEMENT WARRANTY
Please take care with the lock
Battery Replacement
Use the batteries supplied. Batteries should last approximately 6 months
This varies , depending on how many alarms are used per day and how long the alarms sounds for
When replacing batteries always use good quality batteries (e.g. Duracell, or Energizer)
DO NOT Use rechargeable batteries
Battery saving feature
The device has a battery saving feature.
The LCD screen will go blank after periods of inactivity
The time will still be retained and alarms will sound at the programmed times
To activate the LCD , tip the device or press ‘3’
To Select 12 Or 24 Hour Format
1.
Press buttons ‘2’ & ‘3’ simultaneously to switch between 12 hour or 24 hour display
To Set The Current Time
1.
Press button ‘1’ for approximately 6 seconds, until the colon symbol (‘:’) flashes
2.
Press button ‘2’ to change the hours, Press button ‘3’ to change the minutes
3.
Press ‘1’ to lock in the time setting
