background image

Installation Instructions for Typical Wood Frame Construction.

These instructions were developed and tested for use with typical wood frame wall construction 
in a wall system designed to manage water. These instructions are not to be used with any other 
construction method. Installation instructions for use with other construction methods, multiple 
units or bow and bay windows, may be obtained from Pella Corporation, a local Pella retailer, or 
by visiting 

http://www.pella.com

. Building designs, construction methods, building materials, 

and site conditions unique to your project may require an installation method different from 
these instructions and additional care. Determining the appropriate installation method is the 
responsibility of you, your architect, or construction professional. 

Part Number: 801U0103

© 2011 Pella Corporation 

Always read the Pella® Limited Warranty before purchasing or installing 
Pella products. By installing this product, you are acknowledging that this 

Limited Warranty is part of the terms of the sale. Failure to comply with all Pella installation 
and maintenance instructions may void your Pella product warranty. See Limited Warranty for 
complete details at 

http://warranty.pella.com.

INSTALLATION INSTRUCTION STANDARD, PERFORMANCE 
UPGRADE AND HURRICANESHIELD

®

 IMPACT RESISTANT FOR 

FIXED FRAME DIRECT SET WINDOWS

8JOEPX#PUUPN

8JOEPX5PQ

/BJMJOH'JO

'JO$PSOFS

8BUFS3FTJTUJWF#BSSJFS

4IFBUIJOH

'SBNJOH

5PQ
'MBTIJOH
5BQF

0VUFS$PSOFS
'MBTIJOH5BQF

0VUFS
7FSUJDBM
'MBTIJOH
5BQF

4JEF
'MBTIJOH
5BQF

4JEF
'MBTIJOH
5BQF

4JMM'MBTIJOH5BQF

4JMM'MBTIJOH5BQF

0VUFS
7FSUJDBM
'MBTIJOH
5BQF

Instrucciones enspañol en el reverso.

YOU WILL NEED TO SUPPLY:

TOOLS REQUIRED:

Ř

Cedar or Impervious shims/spacers (12 to 20)

Ř

2" galvanized roofing nails (1/4 lb.) 
Note: Performance Upgrade and HurricaneShield® units 
require use of installation clips or screws through the frame.

Ř

Closed cell foam backer rod/sealant backer (12 to 30 ft.)

Ř

Pella® SmartFlash™ foil backed butyl window  
and door flashing tape or equivalent

Ř

Pella Window and Door Installation Sealant or equivalent 
high quality, multi-purpose sealant (1 tube per window) 

Ř

Low expansion, low pressure polyurethane insulating 
window and door foam sealant - DO NOT use high 
pressure or latex foams

Ř

Interior trim and/or jamb extensions (15 to 40 ft.)

Ř

Tape measure

Ř

Level

Ř

Square

Ř

Hammer

Ř

Stapler

Ř

Scissors or utility knife

Ř

Sealant gun

4&"-"/5

4&"-"/5

Summary of Contents for 801U0103











Reviews: