![background image](http://html1.mh-extra.com/html/pella/80at0102/80at0102_installation-instructions-manual_1523227001.webp)
INSTALLATION INSTRUCTION
INSTRUCCIONeS De INSTALACION
FOR BAY AND BOW WINDOW WITH SeAT BOARD
VeNTANAS De MIRADOR CON TABLA De ASIeNTO
Note: These instructions may be used for all Pella Bay and Bow windows that have a
head and seat board. Support cables are installed in factory assembled bay and bow
combinations.
Caution: The factory-installed support cables must be attached to members capable of
supporting 1,300 lbs. If the members are not capable of supporting 1,300 lbs., knee braces
must be used in addition to the cables. Bay and bow units are not intended to support any
roof structure. Consult an architect, engineer or construction professional if the ability of the
members to support the bay or bow is not known.
Installation Instructions for Typical Wood Frame Construction.
These instructions were developed and tested for use with typical wood frame wall construction
in a wall system designed to manage water.
These instructions are not to be used with any
other construction method.
Installation instructions for use with other construction methods,
multiple units or bow and bay windows, may be obtained from Pella Corporation, a local Pella
retailer, or by visiting
http://www.pella.com.
Building designs, construction methods, building
materials, and site conditions unique to your project may require an installation method
different from these instructions and additional care. Determining the appropriate installation
method is the responsibility of you, your architect, or construction professional.
Cable clamp
Jamb extensions
Cross bracing
Rafter tail
Jamb covers
Flashing tape
Knee braces
Bottom frame
expander
Head frame
expander
Always read the Pella
®
Limited Warranty before purchasing or installing Pella products.
By installing this product, you are acknowledging that this Limited Warranty is part of the terms of
the sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella
product warranty. See Limited Warranty for complete details at
http://warranty.pella.com.
Part Number: 80AT0102
©2008 Pella Corporation
Lea las instrucciones en español en el reverso.
C.
,