![background image](http://html1.mh-extra.com/html/stanley/timermax/timermax_operating-instructions_1361129001.webp)
O P E R ATING INSTRU C T I O N S
The first press of the
”Timer”
button displays
the
ON
settings for the
1
st program, the second
press– its
OFF
settings.
The third press displays
the
ON
settings for the
2
nd program, and so on
to the twelfth press of the
”Timer”
button, which
displays the
OFF
settings for the
6
th program.
You don’t need to use all six “ON/OFF” programs.
This number shows
which program of
six is being viewed.
Read instructions carefully in order to set-up your TimerMax properly.
1
PLUG THE TIMER INTO AN 125V OUTLET
that is visually and manually
accessible. Allow built-in batteries to initially charge for ten minutes,
fully charge in five hours. [Once fully charged the battery will
remember your settings for up to six months.] If the display appears as
shown here (flashing), proceed to step 2. If not, press and release small “
R/Reset
” button
gently with a pencil point or opened paper clip.
2
To
SET CURRENT DAY AND TIME,
the
” /Time”
button must be
pressed and held, throughout this step. Press the
”Day”
button until
the present day of the week appears. Do the same with the
”h+”
and
”m+”
buttons to set the time. Note that either
A
or
P
appears in the
bottom right of display window to indicate
AM
or
PM
.
3
To
SET THE TIMER
, press the
”Timer”
button once and the display
will appear as shown here. Next, set the time [with the
”h+”
and
”m+”
buttons,
as above
] and day(s) you want your appliance/light
“ON” [refer to the
Day button
section on the bottom LEFT of this
page for a list of 11 different day(s) options]. Press the
”Timer”
but-
ton a second time [note that OFF appears in the display] and set the
time and day(s) you want your appliance/light “OFF”.
For more detail,
see examples on other side.
This step can be repeated five times,
for a total of
6
“ON/OFF” programs.
4
Press the
” /Time”
button to return to current day and time display.
5
Finally, plug your appliance/light into the timer. Be sure that the item plugged into the
timer is switched “ON”.
MO
12
:
00
OFF
MO TU WE
TH
FR SA SU
3
:
35
OFF
P
MO TU WE TH FR SA SU
TIMER
- -
:
- -
ON
This number
represents which
program of six is
being viewed.
1
140 58th Street, PO Box 67, Brooklyn, NY 11220
718-943-7000 • Toll Free 800-730-3707
•
www.thencc.com
Day Timer
R
h+
m+
Time Timer Day h+ m+
Reset
Override
Timer
Max
™
Timer
Max
Outdoor
™
BU T TON FUNCTIONS
/Time
–
Set and display present day and time.
Timer
– Set/view
6
“ON/OFF” programs.
Day
– Set day(s). See eleven different settings
below [Hold for fast forward].
h+
– Set hours. [Hold for fast forward]
m+
– Set minutes. [Hold for fast forward]
/Override
– Manual “ON/OFF”. When this
button is pressed it will change the current state
from “OFF” to “ON” or vice versa. When the next
programmed time is reached the timer will revert
to the programs control.
R /Reset
– Clear all settings.
Timer button
1.
MO TU WE TH FR SA SU
–
Daily
”ON/OFF“ settings will repeat every day.
2.
MO
will only operate Monday.
3.
TU
will only operate Tuesday.
4.
WE
will only operate Wednesday.
5.
TH
will only operate Thursday.
6.
FR
will only operate Friday.
7.
SA
will only operate Saturday.
8.
SU
will only operate Sunday.
9.
MO TU WE TH FR
–
Weekday
will operate Monday to Friday.
10.
SA SU
–
Weekend
will operate Saturday and Sunday.
11.
MO TU WE TH FR SA
–
6 Day
will operate Monday to Saturday.
Liquid Crystal Display (
LCD
)
Timer
Max
™
/Timer
Max
Outdoor
™
MO TU WE TH FR SA SU
TIMER
- -
:
- -
ON
1
Day button settings for Timer mode
HINTS and TIPS
(
The rechargeable battery in the timer should be charged first by plugging it into a
regular household outlet (125V) for ten minutes.
(
Ensure the “ON/OFF” switch on your appliance or light is in the “ON” position when
connected to the timer.
(
Do not expose the timer to extremely high or low temperatures. Do not place in
direct sunlight.
(
TimerMax is for indoor use only. TimerMax Outdoor is weatherproof.
(
Display is clearer when viewed from above.
(
To fast forward, press and hold the
“h+”
,
“m+”
or
“Day”
button.
(
Check your programmed times by pressing the
“Timer”
button (up to 12 commands
available).
(
Ensure the hour has been set correctly to
AM
or
PM
, indicated either by
A
or
P
.
(
For any given day and time, if one program is set to ON, and another program OFF,
TimerMax will turn your appliance/light OFF.
(
Return to the clock function by pressing the
“ /Time“
button.
is the trademark of The Stanley Works and Subsidiaries. Produced under license by The NCC, Brooklyn, New York.
DO NOT EXCEED 1875 WATT, 15 AMP MAX. LOAD
Customer Service Assistance
Toll Free 800-730-3707
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week