Assembly Instructions for Hanging Folder Frames 64855
Package contains components for two complete frames
A. Tie Rods (4)
B. Metal Side Rails (4)
C. U Frames (4)
D. Black Plastic Corner Pieces (8) (4 D1 / 4 D2)
E. Black Plastic Side Inserts (8)
Tools needed: tape measure, hammer and pliers.
Tools needed: tape measure, hammer and pliers
1.
Measure the inside of the file drawer from front to back. This will determine the
length of the Metal Side Rails.
2. Measure two
Metal Side Rails (B)
.
3. Measure the inside of the file drawer from front to back. This will determine the
length of the Metal Side Rails.
4. If necessary, place pliers next to indentation closest to the length you need, bend
back and forth until rail breaks. Use file to soften edges, if needed.
