![background image](http://html1.mh-extra.com/html/the-container-store/elfa-freestanding/elfa-freestanding_assembly-instructions_1099637001.webp)
Instructions for Easy Assembly
Step 1
Insert Upright into Foot
TIP
——————————————
■
If assembling on tile or wood, you must protect the floor.
— The holes on the side of the Upright indicate the bottom of
the Upright. There is no front or back to the Uprights.
— Line up the Upright with the slot in the Foot.
(Figure A)
To secure, you can tap the Upright and Foot together on the
ground or use the mallet. Make sure the Upright is all the way
into the slot on the Foot.
(Figure B)
— Repeat with a second Upright and Foot.
Step 2
Install Crossbraces
— Place the assembled Uprights/Feet on the floor as shown.
(Figure C)
— Insert Crossbraces diagonally into holes at bottom of the
Uprights.
(Figure C)
— Gently hold the Crossbraces at the center with one hand.
Using your other hand, lift one Foot so that it faces up, then
lift the other Foot.
(Figure D)
Continued on the next page.
TIPS
for getting started
—————
■
It’s best to have two people to assemble an 83" tall solution.
■
Please note that any solution used away from the wall
requires feet on both sides of the solution.
■
If you have Foot Height Extenders, add them before
proceeding. To install, unscrew both levelers from the Foot
and screw the Extenders directly into base of the Foot. The
levelers can then be screwed into the Foot Height Extenders
and adjusted as needed to accommodate baseboards
between 2-4".
Assemble a single-sided
solution
1
Tools needed: plastic mallet, ladder or step stool for 83
"
tall solutions
A
B
C
D