Instruction/Operational Manual for SmartPool Programmable Timer
Model:
EQTM-2400NA
Warnings and Safety Instruction
WARNING:
Ensure the system is plugged directly into a GFI protected outlet.
WARNING:
Do not use an extension cord to operate the timer as this is an electrical shock hazard.
WARNING:
Do not allow children to install or operate the timer.
WARNING:
Do not disconnect the timer or equipment plugged into the timer by the cord; use the plug end
to disconnect from the outlet.
WARNING:
Do not use any outlet or voltage converter in conjunction with this timer.
WARNING:
Any alteration or changes to the timer will void the warranty.
Setting the Timer
1)
Plug the timer into a GFI protected outlet (the RED Power LED will light).
2)
Press the RED button to select the daily power cycle (Fig 1). This will be indicated by a GREEN light beneath the
selected time cycle.
NOTE:
The time of day the cycle is selected, is the time the cycle will begin each day.
3)
To turn the timer OFF, press the RED button until the RED LED is the only light illuminated on the timer.
Figure 1
