Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
1.1.
Electrical Safety
WARNING!
It is the user’s responsibility to check the following:
1.1.1.
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and
all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with
all electrical products. You may obtain an RCD by contacting your local Sealey dealer.
1.1.2.
If the spray gun is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable
Appliance Test) tested.
Electrical safety information, it is important that the following information is read and understood.
1.1.3.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
1.1.4.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
1.1.5.
Important
: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse - see fuse rating in these instructions.
8
DO NOT
pull or carry the appliance by the power cable.
8
DO NOT
pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a
firm grip on the plug.
8
DO NOT
use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or
replaced immediately by a qualified electrician.
1.1.6.
This product is fitted with a BS1363/A 13 Amp 3 pin plug.
If the cable or plug is damaged during use, switch the electricity supply and remove from use.
Replace a damaged plug with a BS1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.
Class II products are wired with live (brown) and neutral (blue) only are marked with the Class II symbol;
A) Connect the BROWN live wire to the live terminal ‘L’.
B) Connect the BLUE neutral wire to the neutral terminal ‘N’.
C) After wiring, check that there are no bare wires and ensure that all wires have been correctly connected.
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
8
DO NOT
connect either wire to the earth terminal.
Sealey recommend that repairs are carried out by a qualified electrician.
1.2.
General Safety
Familiarise yourself with the application, limitations and potential hazards peculiar to the spray gun.
WARNING!
Disconnect the spray gun from the air hose before changing accessories, servicing or performing any maintenance.
9
Maintain the spray gun in good condition (use an authorised service agent).
9
Replace or repair damaged parts.
Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the
warranty.
9
Keep the spray gun clean for best and safest performance.
9
Wear approved safety respiratory protection and safety goggles.
9
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and tie back long hair.
9
Locate the spray gun in the desired working area, keep area clean and tidy and free from unrelated materials and ensure that there is
adequate ventilation and lighting.
9
Keep children and unauthorised persons away from the working area.
9
Avoid unintentional operation.
8
DO NOT
point spray gun at yourself, other persons or animals.
8
DO NOT
carry the spray gun by the hose, or yank the hose from the air outlet.
8
DO NOT
use the spray gun for any purpose other than for which it is designed.
8
DO NOT
allow untrained persons to operate the spray gun.
8
DO NOT
get the spray gun wet and
DO NOT
use outside or in damp or wet locations or areas where there is condensation.
8
DO NOT
operate the spray gun if any parts are missing or damaged as this may cause failure and/or possible personal injury.
8
DO NOT
direct air from the air hose at yourself, other persons or animals..
9
When not in use switch the unit off and disconnect from the mains power supply.
Refer to
Instruction
Manual
H
VLP2000.V2 | Issue 2 - 21/10/15
Original Language Version
© Jack Sealey Limited
W
ear eye
Protection
W
ear
Respiratory
Protection
INSTRUCTIONS fOR
HVLP SPRAY GUN KIT 600W 230V
mOdEL NO:
HVLP2000.V2
Recommended fuse rating
5Amp
