Scotsman C2648 - Service Manual Download

Page: 1 / 77

Introduction

The design of this modular remote cuber is the result of years of experience with remote ice machine
refrigeration systems. Standard features of this product include front accessible on-off switches,
always-visible indicator lights, mechanical assist ice harvest for extra efficiency, automatically adjusting
water purge and a control system that optimizes system operation.

The manual includes installation information, technical details, diagnostics and service parts.

Note the Caution and Warning symbols when they appear on the product or in this manual. They
indicate potential hazards. Keep this manual for future reference.

November 2010

Page 1

C2648 Service Manual

Installation Table of Contents

Installation: Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2

Model Number Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

Electrical and Refrigeration Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4

Condenser and Ice Machine Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5

Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

Panel Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7

Remote Condenser Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

For The Installer: Remote Condenser

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9

Precharged Line Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10

Coupling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11

Plumbing Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13

Final Check List:

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14

Initial Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16

Use and Operation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17

Switch Panel Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18

Options and Other Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19

Cleaning, Sanitation and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20

Remote condenser and other maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22

Prodigy Cuber System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23

Summary of Contents for C2648 -














































































Search results

Summary of Contents for C2648 -

Reviews:

Related manuals for C2648 -

Brands by name

Popular brands

Scotsman C2648 -, Service Manual

Search results

Summary of Contents for C2648 -

Reviews:

Related manuals for C2648 -

Brands by name

Popular brands