DIGITAL TIME SWITCH
EN -
1
PCF-230
We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product Then keep this manual in a safe
place.
Note
Check that the voltage in-house corresponds to the
information on the type plate.
Do not expose the appliance to extremely high or low
temperatures.
Avoid contact with water.
Technical information
Working voltage: 230V (50Hz) – 250V
Maximum resistive capacity: 3500W/16A
Maximum inductive capacity: 625 VA ind.
Programming: periods of min. 60 seconds.
Day/week program.
Random function.
Explanatory terms
Resistive appliances are appliances that consume the
same current quantity for the whole duration. E.g. lights.
Inductive appliances, on the other hand, consume much
more current at the start than in normal operation. This
includes coffee-makers, boilers, heating appliances, etc.
If the inductive appliance exceeds the inductive capacity
of the time switch the appliance may not be connected to
it. If it is the switching contact in the time switch will
prematurely fail. This falls outside the guarantee
conditions.
Rechargeable battery
A rechargeable battery ensures that the set time and all
other settings are saved in the case of a power failure (to a
maximum of 150 hours with a fully charged battery). If the
battery appears to be nearly empty on purchasing, plug the
time switch into the plug socket for 5 minutes before
starting programming.
12- or 24-hour display
You can select either 12-hour or 24-hour display. To switch
between the 12-hour display and 24-hour display keep the
“h key”
pressed together with the
“+/-1h”
key
Setting the time
Keep the
key
pressed then press the
“1-7 key”
to set
the correct day. (1:Monday, 7:Sunday)
Keep the
key
pressed then press the
“h key”
to set
the correct hour.
Keep the
key
pressed then press the
“m key”
to
set the correct minute.
ON/OFF switching program
You can set up to 20 programs with the option of
repeating them daily or weekly.
If you press the
PROG
key once,
“--:--“
appears with
each day of the week on the display.
Press the
“1-7 key”
repeatedly to set the day(s) on
which the program must activate. You can also
select combinations of days along with separate
weekdays. Press
PROG
to confirm and proceed with
setting the hour.
Press the
“h key”
to set the hour at which the
program must activate then
PROG
to set the minute.
Press the
“m key”
to set the minute at which the
program must activate.
With the
key
you can switch between
(switching on) and
(switching off)
Always confirm a command with
PROG
.
Repeat the steps above to set a maximum of 20
programs.
The time switch automatically goes back to the
current operating mode and displays the time.
NOTE
: The number of memory locations still free is
indicated by e.g. FR18. If all memory locations are
occupied FR00 appears.
Insert the plug of the device to be switched in the plug
socket part of the time switch. If the connected
appliance has an “on-off” switch make sure this is “on”.
Deleting a set program
Press the
PROG
key 1 to 20 times until the required
switching command appears. Then press the
“h
key”
and the
“m key”
until you see
“--:--“
appear.
Keep the
key pressed for 3 seconds to delete the
switching time. The time switch then goes back to
the current operating mode.
NOTE
: If you press the
RESET
key the factory settings
are automatically reset.
Random function
This function randomly switches the timer on and off.
This function ensures the timer generates a random
delay of 1 to 45 minutes for the set times.
Press
RND
to activate the random function.
This function can be switched off by again
pressing
RND
.
