background image

SET CLOCK

■  

Press the + button to advance clock time  

  (hold button for quick advance).

■  

Press the – button to reverse clock time  

  (hold button for quick reverse).

START TIME

■  

Press the + button to advance start time  

  (hold button for quick advance).

■  

Press the – button to reverse start time  

  (hold button for quick reverse).

HOW LONG

Set watering duration from 1 to 240 minutes 

using the + and – buttons.

HOW OFTEN

Set watering frequency as every 6 hrs, 12 hrs, 

or from 1 to 7 days using the + and – buttons.  

1 is every day, 2 is every other day etc.  

up to 7 days.

AUTO

Timer waters according to programmed time,  

station, duration, and frequency.

RAIN DELAy

■  

When in 

AUTO

, press + button for 24 hrs,  

  48 hrs, or 72 hrs.

■  

Screen will flash between clock and hours  

  remaining before programmed cycle  

 

 resumes.

■  

To remove rain delay, turn dial to 

OFF

  

  and then back to 

AUTO

.

INSTALLING THE bATTERIES

■ 

Remove the tray on the back of the timer  

  by sliding it out.

■  

Insert two AA (1.5V) alkaline batteries  

  (not included) and replace the tray.

■  

Replace batteries when low battery  

  icon appears.

INSTALLATION

■ 

Attach timer to an outdoor hose faucet  

  and turn on after programming.

PROGRAMMING THE TIMER

■ 

Rotate the dial to positions indicated  

  or setup.

■ 

Press station button to switch between    

  station 1 and 2 for all programming.

PN 27133-24 rC

dual-Outlet dIGItal tImer

  

PROGRAMMING FOR THE  

  DIGITAL OUTLET OF THE TIMER

MANUAL/HAND WATERING

To water without interrupting the set cycle, 

press [MANUAL] button and then use + and – 

buttons to set from 1 to 240 minutes.

■  

To remove manual watering (turn off),  

  turn dial to 

OFF

.

■  

To resume programmed cycle turn the  

  dial back to 

AUTO

.

TROUbLESHOOTING

Water does not come on at desired time.

Check if:

■  

Clock is set to correct time including  

  AM and PM.

■  

Start time is set to desired time including  

  AM and PM.

■  

Rain Delay is on.

Timer does not water.

Check if:

■  

Timer is set to AUTO.

■  

Hose faucet is on.

■  

Batteries are low.

■  

Clock is set to correct time including  

  AM and PM.

■  

Rain Delay is on.

Water won’t turn off.

Check if:

■  

Watering duration is set to desired time.

■  

Start times begin after previous  

  watering cycle has run through all  

  stations and set durations.

WHEN ExPECTING FREEzING TEMPERATURES, TIMERS 

SHOULD bE REMOvED FROM THE HOSE bIb TO AvOID 

POTENTIAL FREEzE DAMAGE.

p 801 295 9820

 

f 801 951 5815

www

.fluid-studio

.net

1065 South 500 

W

est

 

Bountiful,

 Utah 84010

pr

oof no:

 

2

d

ate:

 

08.29.11

des:

 

SH 

spck:

 

SH

job no:

 N/A

client:

 

ORBIT

sku:

 

27133

upc:

 

N/A

file name:

 

27133-24 rC

.indd

softw

are:

 

InDesign CS5

colors

 

additional instructions:

· 

Font sizes cannot be smaller than 7 pt.

 

· 

   

· 

Proofing Code:

 LB486038

color non  printing Die 

PMS

 

???

color non  printing 

 

Glue Area 

 

color non  printing 

 

Product 

P

osition  

PMS

 

???

Registration

Black

 

Printers are responsible for 

meeting print production 

requirements

. An

changes 

must be appro

ved b

y the 

client and Fluid Studio

printed piece must meet 

designa

ted specifica

tions 

on this form

.

dimensions:

fla

t:

  w:

 12.0"

 h

6.0"

finished:

  w 

3.0"

 d

3.0"

© 2011 Fluid Studio

. T

his 

w

ork is the property of Fluid 

Studio

, and cannot be used,

 

reproduced or distributed 

in an

y w

ay without their 

express permission.

© 2011 Orbit Irrigation Products, Inc. 

All rights reserved. All trade names are 

registered trademarks of respective 

manufacturers listed.

Orbit

®

 Irrigation Products, Inc. 

North Salt Lake, UT 84054

Reviews: