READ IT
OR
WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit https://goo.gl/GhdCbp
40954
DAYSMART 7-DAY
IN-WALL TIMER
SET TIME
Use up ( ) and down ( ) arrows to set current time.
Take note of the AM/PM setting.
Note:
When timer is reset, the time will flash.
SETTINGS
1.
Press and hold set button ( ) for 3 seconds and
current time will flash on the screen. Release set
button.Use ( ) to select current time and press
set button ( ).
2.
“YEAR” will flash on the screen. Use ( ) to
select the current year and press set button ( ).
3.
“MONT” will flash on the screen. Use ( ) to
select the current month and press set button ( ).
4.
“DAY” will flash on the screen. Use ( ) to select
the current day and press set button ( ).
5.
“ZONE” will flash on the screen. Use ( ) to
select current zone (see Figure 1). Zone is used to
determine sunrise/sunset times.
6.
“DST” (daylight saving time) will flash on the screen. Use ( ) to select “ON” if you
would like the timer to automatically adjust for daylight savings time or “OFF” if you
would not like the timer to adjust automatically.
Note:
If no button is pushed for 10 seconds, the timer returns to clock mode. To re-
enter settings, press and hold set button ( ) for 3 seconds. Use the ( ) to scroll
to the desired setting.
Once settings are complete, either wait 10 seconds and the timer automatically
reverts to clock mode, or press and hold set button ( ) for 3 seconds.
PROGRAMMING OPTIONS (PRESET)
Note:
An illuminated LED on a button indicates the program is active. To deactivate program,
press the button again and the LED will turn off.
Evening – Sunset to 12AM:
Press
EVENING
button and
the sunset time will flash on the screen. Use arrows ( )
to adjust time up to 1 hour in either direction and press set
button ( ). Days of the week will flash on the screen. Use
arrows ( ) to select the correct day options and press
set ( ).
On time:
Press and release
ON TIME
button and the
clock will begin flashing. Use arrows to set the desired on
time ( ) and press set button ( ). Default is 6PM
for all days. Days of the week will then flash on screen. Use
arrows ( ) to select the day(s) you want the timer to be
active and press set button ( ).
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from which the receiver
is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
Total ratings for both outlets:
120VAC, 60Hz
15A General/Resistive
1200W Tungsten
1200W Standard Ballast
1/2HP Motor
5A or 600W Electronic Ballast/LED
Works with LED, CFL, incandescent and halogen bulbs.
Questions? Contact our U.S.-based Consumer Care at 1-855-698-8324,
Monday–Friday, 7AM–8PM CST.
For the most up-to-date product support, accessories, electronic (PDF) format manuals and
more, visit www.byjasco.com/support.
DO NOT RETURN THIS
PRODUCT TO THE STORE
STOP
FCC/IC - EN
SPECIFICATIONS
RISK OF ELECTRICAL
SHOCK
• SHUT OFF POWER AT FUSE
BOX OR CIRCUIT BREAKER
BEFORE INSTALLATION
• DO NOT USE IN WET
LOCATIONS
• USE INDOORS ONLY
RISK OF FIRE
• DO NOT USE TO CONTROL
APPLIANCES THAT CONTAIN
HEATING ELEMENTS
(COOKING APPLIANCES,
HEATERS, IRONS, ETC.)
• DO NOT EXCEED
ELECTRICAL RATINGS
• DO NOT USE TO CONTROL
RECEPTACLES
• USE COPPER WIRE ONLY
WITH THIS DEVICE
• TIGHTEN ALL CONNECTIONS
TO 1-1.4 N-M (8.85 TO 12.39
LBF-IN.)
• FOR SUPPLY CONNECTIONS,
USE 14AWG OR LARGER
WIRE RATED AT LEAST 75° C.
• FOR GROUNDING LEAD, USE
12AWG OR LARGER WIRE
RATED AT LEAST 75° C.
WARNING
Off time:
Press and release
OFF TIME
button and the
clock will begin flashing. Select desired off time and
press set button ( ). Default is 10PM for all days. Days
of the week will then flash on-screen. Use arrows ( )
to select the day(s) you want the timer to be active and
press set button ( ).
Sunset on:
Press and release
SUNSET ON
button and
the sunset time will flash on the screen. Use arrows ( )
to adjust time up to 1 hour in either direction and press
set button ( ). Days of the week will then flash on-
screen. Use arrows ( ) to select the day(s) you want
the timer to be active and press set button ( ).
Sunrise off:
Press and release
SUNRISE OFF
button and the
sunrise time will flash on the screen. Use arrows ( ) to
adjust time up to 1 hour in either direction) and press set
button ( ). Days of the week will then flash on-screen.
Use arrows ( ) to select the day(s) you want the timer
to be active and press set button ( ).
Extra programs:
This option offers seven additional
ON/OFF programs. Press and release
EXTRA
PROGRAMS
button and “ON 1” will flash on-screen but
no time will be displayed, only “--:--.” Press set button ( )
to select program “ON 1” and the “--:--” will flash on
screen. Use arrows ( ) to select time and press set
button ( ). Days of the week will then flash on-screen.
Use arrows ( ) to select the desired days of the
week and press set button ( ). Program On 1 is now
set. To go to the next program, use the arrows ( )
and press set button ( ) on the next program you want to set. Repeat these steps for
Program Off 1, Program On 2, Program Off 2, etc.
To skip through without setting,
simply stop pressing buttons and the display will revert
to clock mode after 10 seconds or press set button ( ). You can also use the arrows ( ) to
scroll through the options without setting a time. After Program Off 7, the menu will start
over with Program On 1. The LED indicator light will remain on if any of the additional
programs are set.
To delete one of the extra programs,
use arrows ( ) to choose the program you wish
to delete and press set button ( ) to select program. Use arrows ( ) to scroll time to
between 11:59PM and 12:00AM. The display will show “--:--” to confirm the program has
been deleted. No additional steps are needed. The display will revert back to clock mode
after 10 seconds or when the set button ( ) is pressed.
Note:
When program on is set to “--:--”, “DELE” flashes to confirm program has been
deleted.
Countdown mode:
Press
COUNTDOWN
button, the
countdown time will flash. Use arrows ( ) to adjust
the countdown time. The switch will now count down for
the time set every time the ON/OFF or door override is
used. While switch is in countdown mode, the timer will
run the programs normally but use the countdown time
every time the ON/OFF override is selected.
RESET BUTTON
To set the switch back to factory settings, press and release
the reset button with a toothpick. The reset button can be
found behind the door in between the
EXTRA PROGRAMS
and the
COUNTDOWN
buttons. You can access the
button by either removing the door or by holding the door
at a 90 degree position and use a toothpick to depress the
reset button.
ON / OFF
COUNTDOWN
TIME
PROGRAMS
EXTRA
OFF
ON
SUNRISE
SUNSET
TIME
OFF
ON
- 12AM
EVENING
CLOCK SET COUNTDOWN
AM
ON / OFF
COUNTDOWN
TIME
PROGRAMS
EXTRA
OFF
ON
SUNRISE
SUNSET
TIME
OFF
ON
- 12AM
EVENING
CLOCK SET COUNTDOWN
AM
ON / OFF
COUNTDOWN
TIME
PROGRAMS
EXTRA
OFF
ON
SUNRISE
SUNSET
TIME
OFF
ON
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
ON / OFF
COUNTDOWN
TIME
PROGRAMS
EXTRA
OFF
ON
SUNRISE
SUNSET
OFF
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
ON / OFF
COUNTDOWN
PROGRAMS
EXTRA
OFF
ON
SUNRISE
SUNSET
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON / OFF
COUNTDOWN
PROGRAMS
EXTRA
OFF
SUNRISE
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON
SUNSET
ON / OFF
COUNTDOWN
PROGRAMS
EXTRA
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON
SUNSET
OFF
SUNRISE
ON / OFF
COUNTDOWN
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON
SUNSET
OFF
SUNRISE
PROGRAMS
EXTRA
ON / OFF
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON
SUNSET
OFF
SUNRISE
PROGRAMS
EXTRA
COUNTDOWN
ON / OFF
COUNTDOWN
CLOCK SET COUNTDOWN
AM
- 12AM
EVENING
TIME
ON
TIME
OFF
ON
SUNSET
OFF
SUNRISE
PROGRAMS
EXTRA
RESET
BUTTON
NORTH
ALASKA
HAWAII
NORTH
CENTRAL
CENTRAL
SOUTH
SOUTH
FIGURE 1
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
This product is manufactured by Jasco Products Company LLC.
This Jasco product comes with a 2-year limited warranty. Visit www.byjasco.com for warranty details.
MADE IN CHINA/HECHO EN CHINA
©JASCO 2019 | 40954 | 04/08/19 v1
Jasco Products Company LLC.
10 E. Memorial Road
Oklahoma City, OK 73114
