PROGRAMMABLE DIGITAL TIMER
FOR LOW VOLTAGE LED LIGHTING TRANSFORMER
INSTRUCTION MANUAL
LU1800DT22065
FUNCTIONS OF KEY
FUNCTIONS
*For the first use, please press the RESET button key!
KEY
MENU
+
-
OK
COUNTDOWN
RESET
FUNCTION
shift between CLOCK and PROGRAM modes
increase the number by 1 or hold to roll fast
decrease the number by 1 or hold to roll fast
confirm the current setting
start the countdown function
reset the timer and clear all data previously setting
A
B
C
D
E
F
G
PART
MANUAL
shift between OFF/AUTO OFF/ON/AUTO ON modes
RESET
1.
For the first use of press the RESET button, the LCD will fully display
for 2 seconds and then the clock will show:
The blinking colon means the clock is running.
Press
MENU
at clock display to start setting. OFF indicates that
the timer is in OFF mode.
2. SETTING THE CLOCK
A.
Press
OK
and ‘day’ will flash, use
+/-
to adjust.
B.
Press
OK
to confirm and hour will flash, use
+/-
to adjust.
Make sure AM/PM is correctly set.
C.
Press
OK
to confirm and minute now flashes, use
+/-
to adjust.
Note: When minute is set, the clock will go from 0 second.
D.
Press
OK
to confirm.
E.
Note:
To set the clock once again, press
OK
and repeat the steps
from 2.B.
To set programs for the timer, press
MENU
and see Section 3.
To quit to clock display, hold
MENU
for 2 seconds or more.
If no key is pressed within 1 minute, the clock format will be displayed.
3. SETTING PROGRAMS
Press MENU at clock display till PROG is shown on the screen. Up to
9 programs can be set for each day of the week. For instance, if you
want to set a daily program that starts at 8:00 AM and ends at
5:15 PM, please follow the following steps:
Press
MENU
till the screen shows:
A.
1ON is code of the current program.
Press
OK
to start setting. ‘Day’ will flash at this stage, use
+/-
to
adjust. Press
+
, the options will show in such order:
(MO, TU, WE, TH, FR, SA, SU) MO > TU > WE > TH > FR > SA > SU
> (MO, TU, WE, TH, FR) > (SA, SU) > (-:--); Press -, these options
will show in a reversed order.
B.
Press
OK
to confirm and hour will be flashing, use
+/-
to adjust.
In our case, we should select 8 AM:
C.
Press
OK
to confirm and minute will flash, use
+/-
to adjust.
In our case, the minute shall be set to :00.
D.
Press
OK
to confirm and “PROG 1ON” is now correctly set.
E.
Press
MENU
and the screen will show:
F.
Note: -:-- is an invalid option and if it is selected, you can press
OK
again to restart setting. In our case, we should select
(MO, TU, WE, TH, FR, SA, SU):
