TS8100-TIM-H Programmable Timer
ver 1.1
LCD Symbols
Configuration Menu
Setting the clock and day of the week
Select the required operating mode
This timer is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start on time. Follow below steps,
1) Touch time display .
Auto - Automatic mode, the timer executes the preprogrammed schedules. To adjust these schedules, see page 2 the program section.
In addition to Automatic mode, this thermostat has a manual modes. The manual mode maintains a constant on or off status set by the user.
To change the ON/OFF status, touch ON /OFF display area. Use or to adjust. Touch to store and exit.
See overleaf for further setting up information
2) Touch day display .
Use or to change the time. Press and hold
Use or to change the day. Touch to store and exit.(or touch Day display to cancel and exit).
or to change the time faster. Touch to store and exit( or touch time display to cancel and exit).
The buttons are locked
Turning on/off the timer
Automatic mode, executes the programmed schedules
Manual mode
Temporary override your program
AUTO
O / RIDE
Symbols
The program number
Day of the week. Day 1= Monday, Day 2= Tuesday... etc.
Day
Program 1,2,3,4
Symbols
Description
Description
Menu #
01
02
Features description
Features Explanation
Touch or to adjust
Backlight turning-on time
10, 20,30,40,50,60 seconds. 30 seconds by default
To set the backlight turning-on time when the screen is pressed.
Clock format
24H / 12H 24 hour clock by default
12 Hour or 24 Hour clock format selection
03
Done
Done
Done
Then you will see menu 01. Touch or to select the menu number. Use or adjust the settings. Touch to accept and store.
Previous
Done
Next
5+2 /7 Day program mode
This allows you to program either 5 days at once, then the 2 days of the weekend 5 2 = 5+2 day programmable
separately, or a full 7 days at the same time or 7 days separately
7 = 7 day programmable (by default)
touch to turn timer off, and now touch
Set Menu
To enter into menu settings,
page 1
LCD SYMBOLS
CONFIGURATION MENU
SETTING THE CLOCK + DAY OF THE WEEK
TS8100-TIM-H TIMER INSTRUCTIONS
See overleaf for further instructions >>>
SELECT THE REQUIRED OPERATING MODE
Radiant Australia Pty Ltd
Unit 1 / 18 Profit Pass, Wangara, WA 6065
Telephone:
08 9302 4140
Fax:
08 8490 2343
Email:
