background image

Timers

755 Series

755-503revB

Printed in USA 12/06 © 2006

Operation
Manual

Product Identification

The Prince Castle Model 755 Series Multi-display 10-Channel Timer and 16-Channel Timer 
are easy-to-use timers that count down in minutes and seconds, or hours and minutes. Each 
channel has its own display and can be programmed independently. Slide in replaceable 
menu strips identify the product being timed on each channel, and are replaceable as 
restaurant menus change. Both auditory and visual signals are used to alert busy staff people 
when a function is complete.

The Prince Castle Model 755 Series Single-display 4-Channel Timer and 10-Channel Timer 
are easy-to-use timers that count down in minutes and seconds, or hours and minutes. Each 
channel can be programmed independently. Slide in replaceable menu strips identify the 
product being timed on each channel, and are replaceable as restaurant menus change. Both 
auditory and visual signals are used to alert busy staff people when a timing function is 
completed.

LIMITED WARRANTY

This product is warranted to be free from defects in material and/or 
workmanship for a period of 1 year from date of original installation, not to 
exceed 18 months from the date of manufacture.

Any component which proves to be faulty in material and/or workmanship 
will be replaced or repaired (at the option of Prince Castle, Inc.) without 
cost to the customer for parts and labor. This equipment is portable; 
charges for on-location service (e.g., trip charges, mileage) are not 
included in the provisions of this warranty.

This warranty is subject to the following exceptions/conditions:

Use of any non-genuine Prince Castle parts voids this warranty.

All labor to be performed during regular work hours. Overtime premium 
(the incremental amount) will be charged to the customer.

Damage caused by carelessness, neglect and/or abuse (e.g., dropping, 
tampering or altering parts, equipment damaged in shipment, by fire, 
flood or an act of God) is not covered under this warranty.

All problems due to operation at voltages other than that specified on 
equipment nameplates are not covered by this warranty. Conversion to 
correct voltage is the customer’s responsibility.

This equipment must be serviced by Prince Castle Authorized Service 
Agency or a Prince Castle Service Technician during the warranty 
period.

The power cord on this product is rated for a maximum surface 
temperature of 194°F (90°C). If the cord comes into contact with the fryer 
or rethermalizer or any other heated surface, it may be damaged and/or 
cause damage to the product and/or injury to the user. The power cord 
may also be damaged if placed directly in the path of the high temperature 
exhaust emitting from the flue of the fryer or rethermalizer. Damage 
resulting from any such misuse may result in a voided Warranty at the sole 
discretion of the manufacturer.

TABLE OF CONTENTS

Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

1

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

4 – 7

Exploded View and Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

8

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

Telephone: 630-462-8800 • Toll Free: 1-800-PCASTLE

Fax: 630-462-1460 • www.princecastle.com

Summary of Contents for 755 Series









Reviews: