background image

Thank you very much for using Panasonic products. Please read this 
Instruction Manual carefully and thoroughly for the correct and opti-
mum use of this product. Kindly keep this manual in a convenient 
place for quick reference.

OUTLINE

1

This product detects double feeds of metal sheets, lead frames, etc.
The sensitivity is easily set by teaching with actual samples.


Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use products which meet laws and standards, such as 
OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.
Make sure to use the sensor heads and controllers in the specified combinations. If they are used in any other com-
bination, the sensor heads may get damaged.

WARNING

FUNCTIONAL DESCRIPTION

2

POWER

ALM.

OUT-1

OUT-2

PANEL

EXT.

RS232C

NORM.

OFD.

RUN

SET

0-ADJ.

SET-2

SENS.

CH-SELECT

TIMER

SET-MODE

SET-1

CH

⑭ ⑬ ⑫


Lights up when OUT-2 is OFF.
Blinks twice on completion of zero adjustment (0-ADJ.) or 
SET-2 setting in SET mode.

Sensing level indicator
(Yellow 

×

 1, Green 

×

 6)


Seven LEDs show the sensing level.

LEDs light up one after the other during teaching.
All LEDs blink at the same time if the teaching fails.

More the number, thicker or larger the object sheets are, 
more are the LEDs which light up.

Description

Function

Sets the two-sheet threshold level (larger number of sheets).

Sets the one-sheet threshold level (smaller number of sheets).

Calibrates zero level under sheet non-existing condition.

Channel display

The channel can be selected by the channel shift key when 
CH-SELECT is set at PANEL.

Switches between RUN mode and SET mode.

RUN: Detection takes place.

SET: Set-up is done.

Switches timer mode.

NORM. mode: Timer not used.

OFD. mode: Delay timer (50ms approx.) used.

Channel shift key

SET-2 key

SET-1 key

Zero adjustment (0-ADJ.) key

SET-MODE key

TIMER key

Shows the present channel (1 to 8).


Blinks during SET mode.
The decimal point informs whether the set level data has 
been stored.


When an error occurs, the display indicates the error code.
Refer to '

Self-diagnosis (Alarm) function' in '    EX-

PLANATION OF FUNCTIONS'.

6

Decimal point

Lights up
Turns off

Stored
Not stored

Description

Function

Panel cover

Power indicator (Green)

Sensing mode indicator
(Green, Yellow)

Channel select key

(CH-SELECT)

Self-diagnosis indicator 
(Red)

Lights up when the power is ON.

SET mode: Lights up under normal condition.
RUN mode: Lights up on error.


Lights up when OUT-1 is OFF.
Blinks twice on completion of zero adjustment (0-ADJ.) or 
SET-1 setting in SET mode.

Comparative output-1 

(OUT-1) indicator (Green) 

Specifies whether channel selection is by panel operation, 
by external channel select inputs, or through RS-232C com-
munication.

PANEL: Selection is by channel select key.

LOCK: Locks channel selection. In case of GD-C2, this is

also the setting for channel selection by external 
device through RS-232C.

EXT.: Selection is by external channel select inputs.

The table below gives the key and external input operation 
for each channel selection method.

GD-C2:
RS-232C

: Operable

Panel keys

External inputs

Operation

RUN / SET selection

Mode

PANEL

LOCK

(RS-232C)

EXT.

(Note)

(Note)

(Note)

Timer mode selection

SET-1

SET-2

0-ADJ.

RUN / SET

SET-1

SET-2

IN-0

IN-1

IN-2

Channel shift

Note: The RUN / SET selection with the SET-MODE key on 

the panel is effective only when the RUN / SET selec-
tion input is High (RUN mode).

Indicates the sensing mode.

Refer to '

Sensing Mode' in '    EXPLANATION OF 

FUNCTIONS'.


Lights up green: Normal sensing mode
Lights up yellow: Precise sensing mode

6

Comparative output-2 

(OUT-2) indicator (Red) 

MJE-GD(03) No.0030-70V

INSTRUCTION MANUAL

Metal-sheet Double-feed Detector

GD Series

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for GD-3







Reviews: