EBS-40
Quick Start Guide
DC Power
Reset Switch
Package Contents
• EBS-40 Base Station
• Antenna (2)
• Quick Start Guide
EBS-40 Quick Setup
1. Connect power (power supply sold
separately).
2. Plug your network cable into Ethernet
Port 1. The other port can be used to
daisy chain additional EBS-40 units.
3. DHCP is enabled by default.
4. If no DHCP server is available then the
EBS-40 will use the default IP address
and subnet which can be found on the
label on the bottom.
5. Network settings can be changed via
the built-in web page, accessable via the
assigned (or default) IP address.
Ethernet Port 1
Ethernet Port 2
www.opticon.com
