R.6 Massage Chair
Assembly Instructions
1. Remove the base of the chair from box 1
of 2 and place in the desired location.
2. Install the channel covers into the base of
the chair.
Please refer to the accessory and hardware list located on page 18 of the owner’s manual for
proper part names & reference images
3. Plug the female end of the power cord
into the back base of the chair, then plug
the male end of the power cord into a surge
protector.
4. Turn on the main power switch. Note, the
chair will automatically incline. Once the
chair has fully inclined, turn o
ff
the main
power switch again.
