![background image](http://html.mh-extra.com/html/muxlab/500759-tx-dante/500759-tx-dante_quick-installation-manual_1860491001.webp)
© MuxLab Inc.
94-000903-A SE-000903-A
2321Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail:
URL: www.muxlab.com
Specifications
Environment
HDMI 2.0b
Devices
Blu-Ray, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
Transmission
Transparent to the user.
Bandwidth
300MHz
Signals
HDMI 2.0b, HDR10, and HDCP 2.2
Connectors
Note: Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
Two (2) 3.5mm jacks for IR emitter (on TX)/sensor (on RX).
Two (2) 3.5mm jacks for audio insert (on TX)/audio extract (on RX)
One (1) DB9 for the RS232.
Four (4) DIP Switches for device ID addressing.
Maximum Distance
Based on a maximum length
of 6.6ft (2m) of HDMI cable
per end.
Cat5e/6: 330ft (100m) up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
Note: When installed in an electrically noisy environment, an STP cable must be
used. Also, cross-connection reduces the effective distance depending on the
grade of twisted cable used.
Latency
Typical one (1) Frame (16ms), maximum 2 frames (33ms).
Compression
Proprietary Compression.
Bandwidth
Up to 500Mbps.
Network Requirement
1000BaseT with Jumbo Frame.
IR Frequency
38 to 56 KHz (IR Emitter and IR Sensor sold separately).
RJ45 Pin Configuration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R)
Pin 2 (T)
Pin 3 (R)
Pin 6 (T)
Pin 4 (R)
Pin 5 (T)
Pin 7 (R)
Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required.
Power Supply
This device supports PoE (PD), an external power supply is not included. It is
intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional
power supply (500993) may be purchased separately.
PoE
IEEE 802.3af
Power Consumption
Transmitter: 6Watt
Receiver: 6Watt
Temperature
Operating: 0° to 40°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions
4.40” x 5.08” x 1.00” (112mm x 129mm x 25mm)
Weight
1.5lbs (0.68kg)
Compliance
Regulatory: FCC, CE, RoHS
Flammability: 94V0
Warranty
3 years
Order Information
500759-TX HDMI 4K over IP PoE Transmitter
500759-RX HDMI 4K over IP PoE Receiver
Accessories
(These items are sold
separately)
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500990 IR Emitter, and 500991 IR Sensor
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
HDMI/Dante over IP PoE Extender
500759 TX Dante
Quick Installation Guide
Overview
MuxLab’s HDMI/Dante over IP PoE Transmitter, UHD-4K (model 500759-TX-Dante) delivers
HDMI at up to 4K@30Hz with Dante audio to create an independently distributed AV network.
Hundreds of displays and various video wall configurations are supported, depending on network
bandwidth. Audio can be independently distributed to hundreds of Dante supported audio devices.
Each Transmitter can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch.
These units support HDR10 at up to 4K @ 30Hz (4:2:2).
The Transmitter supports PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR
Emitter and IR Sensor, if required, may be purchased separately for IR based remote control
applications.
For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must
have Gigabit ports, DHCP server capability, and support IGMP and Jumbo Frames. MuxLab
recommends using the Cisco SG350 series Managed Switches or the SG550X series stackable
version.
Applications
Applications including any audio Dante digital systems in professional and commercial
applications over long distances.
Installation
1.
Identify the connectors on the Transmitter as indicated on the product labels, see the above front
and rear product views for further details.
2.
Verify that the distance between the HDMI Transmitter is within MuxLab specifications (see
Specifications table for more details).
3.
To install the Transmitter:
3a.
Connect the Transmitter to the HDMI video source with an HDMI compliant cable.
3b.
If the application is point-to-point, then connect one (1) length of Cat 5e/6 (or higher)
grade UTP cable to the RJ45 LINK connector on the Transmitter. If transmitting over
the network, use an Ethernet Switch between Transmitter and Receiver
4.
Configuring Dante equipment
4a Use the free Dante Audinate Controller software found on the Audinate website
(
https://www.audinate.com/products/software
) to manage the connectivity between the
500759 TX Dante and other Dante audio equipment. Both point-to-point and point-to-
multipoint connections are supported.