background image

– 1 –

GB

Safety precautions............................................................... 2

Names and functions of controller components .................. 4

Controller interface .......................................................... 4

Display............................................................................. 5

Basic operations.................................................................. 6

Operation mode............................................................... 6

Preset temperature.......................................................... 7

Fan speed........................................................................ 8

Vane ................................................................................ 8

Controller operation - Function settings .............................. 9

Temperature range restriction ......................................... 9

Operation lock setting.................................................... 10

Mode skip setting........................................................... 10

Backlight brightness setting........................................... 11

Specifications .................................................................... 12

Icon explanations

The square icons used in this manual indicate as follows.

 Indicates settings that can be changed only while the 

units are in operation.

 Indicates settings that can be changed only while the 

units are stopped. 

 Indicates functions that are not available when the 

buttons are locked or the system is centrally controlled.

Prior to use, thoroughly read the instructions in this manual to use the product correctly.

Retain for future reference.

Make sure that this manual and Installation Manual are passed on to any future users.

To ensure safety and proper operation of the remote controller, the remote controller should only be 

installed by qualified personnel.

ON

OFF

CITY MULTI Control System

and Mitsubishi Mr. SLIM Air Conditioners 

Simple MA Remote Controller     PAC-YT52CRA

Instruction Book

D

F

ES

I

NL

PR

GR

RU

TR

SC

TC

DE

SW

WT06591X01.book  Page 1  Tuesday, April 17, 2012  3:29 PM

Summary of Contents for PAC-YT52CRA













Reviews: