![background image](http://html1.mh-extra.com/html/lumapro/2lbn5/2lbn5_operating-instructions-and-parts-manual_1947481001.webp)
Requirements
• Not for use with fluorescent lights.
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
Some codes require installation by a qualified
electrician.
®
This package includes:
1 Light Control
1 Gasket
2 Lamp Shields
1 Mounting Bolt
1 Mounting Strap
1 Rubber Plug
1 Plastic Hanger
6 Screws (3 sizes)
2 Wire connectors
Additional Items needed:
• Screwdriver
• Pliers to tighten locknut
• Ladder
• Lamps for fixture
Operating Instructions & Parts Manual
2LBN5, 2LBN6
SPECIFICATIONS
Range . . . . . . . . . . . . Up to 70 ft. (21 m); 100 ft.
(30.5 m) with Range Boost.
[varies with surrounding
temperature]
Vertical Range . . . . . . Up to 15 ft. (4.6 m)
Sensing Angle . . . . . . Up to 240° horizontal. Up to 80°
Vertical
Electrical Load . . . . . . Up to 300 watt Incandescent [Up
to 150 W each lamp holder].
Power Requirements . 120 VAC, 60 Hz
Operating Modes . . . . TEST, AUTO, and MANUAL
MODE
Time Delay . . . . . . . . 1, 5, 20 minutes
D
ual
B
rite
®
Timer . . . . OFF, 3, 6 hours, Dusk-to-
Dawn
598-1010-05
HEA 008
Printed in China
09/07
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or main-
tain the product described. Protect yourself and others by observing all safety information. Failure to comply
could result in personal injury and/or property damage! Save these instructions for future reference.
LPG-5318
NOTE: D
ual
Z
one
™ adds a zone of detection under
the motion sensor. D
ual
Z
one
™ requires no additional
adjustment and operates in conjuction with the for-
ward-looking sensor.
Meets the ENERGY STAR
®
guidelines
when D
ual
B
rite
®
function is off and
ON-TIME is 1 or 5 minutes and when
used with 120 W Max bulbs.
D
ual
B
rite
®
Motion Sensor
Light Control with 2-Level
Lighting