2-3/8" (60 mm)
2-3/4" (70 mm)
Backset
Centerline
1-
3/
8" (
3
5 mm)
1-
3/
4" (
44 mm)
2-
1/
4" (
5
7 mm)
Face of the door
Edge of the door
Fold
Doble
A
Installation Guide
If drilling a new door, use
the supplied template and
the complete door drilling
instructions.
Parts in the box
Required tools
Additional tools
(if needed)
Latch
Passage Knobs
Screws
Strike
Privacy
Knobs
Emergency Unlock tool
(privacy locks only)
Not required for all applications
2-3/8" (60 mm)
or
2-3/4" (70 mm)
2-1/8"
54 mm
1"
25 mm
Drilling Template
Template is only needed if a new hole must be drilled in the door.
Hold the latch in front of the door hole, with
the latch face flush against the door edge.
If the latch holes are centered in the door hole,
no adjustment is required. Proceed to step 4.
If the latch holes are NOT centered, adjust
latch. See “Latch Adjustment” (step 3C).
Latch Adjustment (only if needed)
Move the pin to extend the latch.
wood block
not centered
centered
*Passage knobs only: Call
Kwikset to order a service kit
for 2-1/4" (57 mm) thick doors.
1-3/8"–1-3/4"*
35 mm–44 mm*
A
C
D
H
F
K
E
J
G
B
A
or
Prepare door and check dimensions
1
Locate latch
2
Instructions continue on reverse
Note: Knobs will not be
installed until step 5.
Adjust the backset of the latch (if needed)
3
A
B
C
62822 / 01
Do not use harsh chemicals or
solvents to clean your lock.
Mechanical lock
Use a damp cloth to wipe away
any excess dirt or debris.
Electronic lock
Use a damp cloth on the lock’s exterior to wipe away
any excess dirt or debris. Use a dry cloth to clean
interior components.
