background image

MOUNT KIT

CM10/24/25

DELUXE CEILING

Congratulations for choosing this HDTV projector.
To assure correct installation, please follow
these instructions carefully. If you have questions
or comments, please don't hesitate to call or write
your Knöll dealer.

1. Calculate the maximum and minimum
     distance from the projector to the screen
     using the HD101, HD110,HD177 or HD272 manual or
     our web site at 

www.knollsystems.com/dlpchose.htm.

    

 The ceiling mount center bolt needs be about 3”

     to the left (when viewing the screen) of the left
     to right center imaginary line from the screen.

2. Select a safe and secure position to firmly
     screw the square ceiling mount to the ceiling.
     We do NOT RECOMMEND using sheet rock
     or wall board with inserts to hold the projector
     and mount. Instead screw the ceiling mount
     to a secure joist or use a 1/2” painted wood
     butch plate secured to the joists and the
     ceiling mount screwed to the butch plate.

3. After screwing the ceiling mount to the ceiling
      thread the knuckle assembly on to the ceiling
      mount. With a allen wrench, slightly loosen
      the knuckle assemble screw.

4. Using the three supplied nylon spacers, mount
      the triangle shaped projector mount on the
      projector With the enclosed bolts and lock
      washers. Be sure to use the lock washers.
     Tighten but do not over tighten the screws.

5. Thread the projector mount onto the knuckle
      assembly (mounted on the ceiling mount)
      and spin  the projector until it is tight. Spin
      the projector up to one more complete turn
      until it is facing the correct direction and the
      allen nut is also facing the screen.

6. Turn the projector on and horizontally and
      vertically adjust the projector until the image
      fills the screen. Tighten the knuckle assembly
      with the allen wrench. The projector may
      need to have its keystone adjusted so the
      image top and bottom fit on the screen.

7. Some jurisdictions require a second safety
      attachment on all ceiling mounted
      equipment. If this is the case in your area,
      add a secondary attachment. A popular
      method is to use a fishing leader from the
     projector’s adjustable foot to the ceiling.

Ceiling
mount

Knuckle
assembly

Projector
mount

Lock
washer X 3

Hex bolt X 3

Nylon
spacer X 3

Screws
(not provided)

Allen bolt

The ceiling mount center bolt needs be about 3”
to the left (when viewing the screen) of the left
to right center imaginary line from the screen.

Knöll Systems

145 Tyee Drive, Point Roberts, WA 98291
11791 Machrina Way, Richmond BC V7A 4V3
 tel (604) 272 4555, fax (604) 272 5595
web www.knollsystems.com

Reviews: