Teepee
INSTRUCTIONS FOR
TEEPEE ASSEMBLY
Congratulations on your purchase
of the KWS Teepee
** Please read instructions
fi rst before you erect it **
First lay all parts out and take inventory.
There should be:
• 1 round mesh fl oor piece
with 5 cutouts
• 3 round canvas platforms
• 1 top round center hub
• 3 feathers
• 1 netted cover with 2 zippered
removable doors plus 2 drawstrings
• 5 ‘A-B-A’ female connectors
• 5 ‘B-C-D’ vertical support rods –
bottom with prongs
• 5 ‘D-E-F-G’ vertical support rods –
top with 2 sets of prongs
• 1 canvas top wrap
• 30 nut caps
**IMPORTANT** Place round mesh fl oor piece where it will be erected
because diameter is 4 feet and will not fi t through most doors and gates.
VERTICAL SUPPORT BARS
D-E-F-G
VERTICAL SUPPORT BARS
B-C-D
A-B-A
CONNECTORS
HUB
FEATHERS
'A' ARCS
'C' ARCS
'E' ARCS
'F' ARCS
Teepee outer mesh covering
Mesh fl oor
Canvas platforms
1
Teepee top wrap
Fully assembled Teepee
NUT CAPS
