COMPONENTS INCLUDED
PART #
DESCRIPTION
(1) Windscreen #JSRLP025
(2)Rear Mounting Brackets
(6) Cross Bars #JSRLP053
(2)Front Mounting Brackets with spacers
HARDWARE INCLUDED
( 44 ) 6mm Bolts
( 8 ) 8mm Mounting Nuts
( 44 ) 6mm Flange Nuts
TECH NOTES
1. Remove weather stripping from both the driver & passenger sides of the vehicle.
2
. Locate OEM bolt loactions where the weather stripping was.
3. Loosely attach the front and rear mounting brackets to vehicle roof studs
5.REPEAT STEPS 4 for opposite side of vehicle
6. Locate wind deflector and fasten to each side of the side rails with the provided hardware.
JSPORT PERFORMANCE ACCESSORIES
Phone: 866.343.5510
(2) Side Rails (Left,Right) # JSRLP054
* WE RECOMMEND PLACING BLANKETS, TOWELS, ETC. ON THE ROOF AND
WINDSHIELD DURING THE INSTALLATION OF THE PLATEAU TO PROTECT YOUR
VEHICLE FROM ACCIDENTAL DAMAGE. TWO PEOPLE WOULD BE BEST FOR THIS
BUILDING PROCESS DUE TO THE LENGTH OF THE PIECES AND PLACEMENT ON
TOP OF THE VEHICLE.*
INSTALLATION
2017+ Passport Plateau Roof Rack Installation
JSRLP024
2017+ Passport Plateau Roof
Rack
4. Loosley bolt the side rails to the brackets. Small spacers will be used on the front only. NOTE; brackets are directional, and
point towards the front of the vehilcle. (WE RECOMMEND USING TWO PEOPLE FOR THIS STEP)
9. One by one, loosley install the cross bars from front to rear.
10. Fasten each bracket tightly, once you have ensured that everything is properly aligned proceed to tighten down and double
check the remaining loose nuts & bolts.
JSPORT PERFROMANCE ACCESSORIES
Phone: 866.343.5510
www.facebook.com/jsportusa
www.instagram.com/jsportusa
WWW.JSPORTUSA.COM
Summary of Contents for JSRLP024
Page 2: ......
