ISO PREFERRED, 1419 DONELSON PIKE, SUITE A, NASHVILLE, TN 37217
ISOPREFERRED.COM
jljlkjljljlk
ISO Preferred Stable & Secure Ankle Brace II (AN35x)
is intended for the support of mild to moderate ankle distortions,
Tibialis Tendinitis, Osteoarthritis of ankle and foot, Chronic ankle instability, Tendinopathy of foot and ankle; Prophylactic
and therapeutic use in sports activities. Rupture- tendon of the foot and ankle, non-traumatic. Acquired flat-foot or
pronation of the foot/ankle.
Stable & Secure Ankle Brace II
The
ISO Preferred Stable & Secure Ankle Brace II
with additional posterior panel
provides stabilizing support for chronic ankle instability, sprains and syndesmosis
sprains while reducing the time it takes to heal discomfort from injuries or post-surgery.
Please follow your orthopedic professional’s instructions explicitly and adjust or
discontinue use only as directed to achieve maximum benefit for your concerns.
Always Putting Our Patients First
1
. Disengage all fastener straps and connections. Open and separate top and bottom straps.
While seated, place the injured foot/ankle into the brace slowly in the same manner that
you would put on a shoe. Position your heel so that it is resting snugly up against the back
of the soft interior liner.
2. Make sure that the rigid plastic is centered over the side of each ankle/calf equally. Fasten
straps above ankle by tucking the side with the toothed strap underneath the other side
and slide the toothed strap through the hole in the overlaying strap.
3. Fasten the calf strap. Make sure that the ankle brace feels securely in place and that little
movement can be achieved.
4.
Simultaneously and equally pull both the straps that are attached to both sides of the
laces that run through the padding atop your foot. Once comfortable with the snugness
of this section of the brace, attach both fastener strap pull tabs to the soft liner. Make
sure the brace feels secure and is centered to both sides of your ankle/calf.
DO NOT
OVERTIGHTEN
.
PROSTERIOR PANEL REMOVAL/APPLICATION
To Remove Posterior Calf Panel,
open the top straps at the front and separate. Release
bottom cushion gripping material from Posterior Panel. Facing the back of the brace, unhook
the cuff straps at tabs on the outside by pulling outside strap toward you to release strap. Pull
plastic cuff strap out of the 2 slots at the lower back of the Posterior Panel and reconnect.
To Add Posterior Calf Panel,
open top straps at front and separate. Release (or optionally,
remove) lower cushion from plastic cuff. Facing the back of the brace, open the plastic cuff at
the tabs provided (located at outside of ankle) by pulling outside strap toward you to snap
open and release the tabs. Attach Posterior Panel by feeding the slotted plastic cuff strap
through the 2 slots on the back of the Posterior Panel. Re-insert cuff tabs into slots at the back
and snap to close. Replace bottom cushion and adjust both cushions to meet at back as
indicated above.
3
2
4
2
1
Pictures Depict Right Side
