![background image](http://html.mh-extra.com/html/innowi/checout-m/checout-m_quick-start-manual_2064183001.webp)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference and
(2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Caution: Changes or modifications not approved by
Innowi could void the user’s authority to operate the
device.
FCC RF Exposure Information (SAR)
This device is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communica-
tions Commission of the United States.
During SAR testing, this device is set to transmit at its
highest certified power level in all tested frequency
bands and placed in positions that simulate RF
exposure in usage near the body. Although the SAR
is determined at the highest certified power level, the
actual SAR level of the device while operating can be
well below the maximum value. This is because the
device is designed to operate at multiple power levels
so as to use only the power required to reach the
network.
Smart. Secure. Sophisticated. Simplified.
by