Thanks for shopping with Improvements
®
!
8W Solar Pump w/Battery Storage
Item #340029
1.
OVERVIEW
1)
The solar pump is designed for indoor or outdoor use, and is powered either by a solar panel or by
110V AC power via a special AC/DC adapter. In order to make the pump work, the solar panel needs
to be placed in the sun facing the sunlight.
2)
The performance of the pump depends on the sunlight intensity and the orientation of the solar panel.
3)
The back-up battery can also be recharged by plugging in the AC adapter to a 110 volt outlet. It is a
slow-charging system that takes about 5 days to fully recharge.
2.
COMPONENTS
1)
Solar panel
2)
Rechargeable battery
3)
Resin rock with rechargeable
battery
4)
Pump with cable
5)
Pole accessories
6)
Nozzle accessories
7)
AC/DC Adapter
3. ASSEMBLING
1)
Unpack all components carefully.
2)
Connect the pump to the solar
panel.
3)
Connect the nozzles with the pump outlet. The nozzles can produce 2 different jet shapes like the above
picture.
4)
Make sure to place the pump fully underwater when the pump operates.
5)
To produce the excellent fountain effect, leave the fountain head or nozzle 5 - 10cm above the water
surface.
6)
The solar pump is now ready to operate.
7)
Connect the pump to the solar panel or AC /DC Adapter when the solar energy is not available.
4. OPERATION
Note the ON/OFF button located at the rear of the rock.
Depress button to ON will cause the fountain to work during adequate sunlight. During adequate sunlight, some
of the solar energy is stored for additional operation after loss of sunlight.
Depress button to OFF will store the energy that is gained during sunlight and will extend the operation when
there is no sunlight. Depress button to ON at any time to begin the flow.
If you have any questions or suggestions regarding
this product, call Improvements
®
at
1-800-944-8870 x 214 (M-F 8:00-4 EST) or e-mail:
See many more products on the Internet!
www.ImprovementsCatalog.com
To order, call
1-800-642-2112
West Chester, OH 45069
Made in China
1207
