background image

Personal Ultrasonic

Personal Ultrasonic

Personal Ultrasonic

Model

20014-MW

20014-MB

READ AND SAVE THESE INSTRUCTIONS!

reach of children.

for any signs of damage. DO NOT use the product if the 

cord has been damaged.

not in operation or while it is being cleaned.

This product is intended for residential use only. DO 

NOT use outdoors.

Transducer

Fan exhaust

Adapter cap

Carrying bag

USB-C cord

Light on/off button

Mist adjustment 

button

Mist exhaust

USB-C port

Reservoir

cover

Initial Setup:

1.  Unravel and straighten the cord before use.

5.  Connect the humidifier to a power outlet using a USB-C 

     cord (included) and a USB power adapter rated DC 5V 

     2A (not included). 

2. 

4.  Turn your water bottle upside down 

and insert into the water reservoir.

Operation:

Maintenance:

 

DO NOT use water bottles greater than 22oz.

20308-01

20201112

1.  To turn the humidifier ON, press the 

     "MIST" button. This will adjust the mist 

     output to LOW (blue light), MEDIUM 

     (yellow light), HIGH (purple light) and 

     OFF. The indicator lights on the top of the unit will 

     indicate the humidity level selected. 

NOTE: You may turn the LED light off by pressing the 

"LIGHT" button while the humidifier is still in operation.

2.  To turn the humidifier OFF, press the "LIGHT" button to 

     make sure the LED light is ON, then press the "Mist" 

     button until the indicator lights turn off.

1. 

humidifier and unplug the power adapter from the wall.

2. Remove the water bottle from the unit and remove the 

adapter cap.

3.

 

Empty the water from the bottle.

4.

Replace the water bottle if necessary.

5. 

empty any remaining water.

6.

 

Wipe any mineral deposits from the cover and base 

with a soft cloth.

7.

 

Replace the cover onto the base. Align 

the notch on the cover with the groove 

on the base. The mist exhaust should 

be 45

O

 to the right of the control 

buttons.

Failure to ensure the adapter cap is seated correctly may

cause the unit to leak water from the water bottle. 

Turn off the humidifier, disconnect the USB-C cord from the 

Rinse the adapter cap thoroughly with warm water.

3.

  

Use the adapter cap that came with 

your humidifier and press it down over 

the mouth of the water bottle firmly.

NOTE: This humidifier works at LOW 

mist setting only if connecting to lower 

rating USB power adapter. 

NOTE: If you are using other USB-C 

cord, please make sure it is less than 33" in length. The 

mist level may be affected if using longer USB-C cords.

Reviews: