background image

1

MODEL: EWC12-21525

USER’S MANUAL

OWNER’S MANUAL

25AMP 12VOLT BATTERY CHARGER

PLUS BATTERY MAINTAINER AND REJUVENATOR

THIS MANUAL CONTAINS IMPORTANT SAFETY AND 

OPERATING INSTRUCTIONS.

READ ENTIRE INSTRUCTIONS BEFORE USE.

WARNING

• The charger is designed to charge and maintain 

conventional lead-acid batteries only

: (VRLA) AGM, Calcium, Gel and WET. 

  

Not suited for Li-ion batteries.

• We always recommend that you check the battery manufacturer’s specifications before using this charger.

• Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames and sparks.

• For indoor use. Do not expose charger to rain, snow, or liquids.

• For charging lead-acid batteries ONLY (of the size and voltage indicated in the specifications table).

• Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.

• The charger should be used on a flat surface.

• Never charge a frozen battery.

• Never charge a damaged battery.

• Never place the charger on the battery while charging.

• Be careful not to drop a metal tool on the battery. A spark or short circuit may cause an explosion.

• When working with a lead-acid battery, remove personal metal items such as rings, bracelets, necklaces, watches, etc.

• NEVER smoke, use an open flame, or create sparks near the battery or charger during charging operations.

• Do not charge non-rechargeable batteries.

• In order to reduce the risk of electric shock, unplug the charger from the AC outlet before doing any maintenance or cleaning. 

   Turning off the controls will reduce risk.

• The kit should not be used by children or by people who are not able to understand the manual, unless they are supervised 

   by a responsible person who ensures the proper use of the kit.

Version française à la page 

Summary of Contents for EWC12-21525















Reviews: