1
PanoLock
™
- Lock Assembly & Handing
PanoLock
™
Multi-Point Lock Instructions
Lock Assembly & Handing
8817 West Market Street
Colfax, NC 27235 | 800.334.2006
www.enduraproducts.com
Ensure lock mortise in panel edge is clear
of dust and debris.
STEP 1
Orient lock assembly as shown.
STEP 2
Latch
Top end of lock
Spring
Adjuster
Screw
Place lock assembly in mortise pocket.
STEP 3
Check to confirm proper
placement of the lock.
Ensure entire length
lock face plate is flush
with edge face of panel.
If lock does not sit flush,
remove lock and check
for debris in pocket. It
may be necessary to
verify mortise pocket
dimensions if no debris or
contamination is present.
STEP 4
Ensure lock drive hubs
align with panel face bores
