KEY-FKPZ Flush-Mount Keypad
Installation Instructions
#
1
Introduction
The KEY-FKPZ is a flush-mount
wired keypad for use with i-on
and Menvier intrusion systems.
The keypad is available in a
range of contemporary finishes
and brings both style and
simplicity to keypad installation.
Measuring only 13mm in depth,
the keypad gives an attractive,
modern appearance against the
mounting surface.
To make installation quick and
easy, the keypad uses a separate terminal board for all wiring
connections, which fits comfortably inside a standard electrical
back box located behind the backplate.
Features:
•
Allows installers to configure the system and users to set or
unset the system.
•
Low-profile “flush-mount” appearance.
•
Range of colours and finishes available.
•
Separate terminal board for ease of installation.
•
Cover and back tamper detection.
•
Internal proximity reader.
•
Backlit display and keys.
•
Navigation keys for installer and user menus, with built-in
alert LEDs.
•
A, B, C, D setting and unsetting keys, with built-in status
LEDs. An engineer can configure the keys to set individual
wards, partitions or part sets, or to control outputs.
