www.bolid.com
S2000-SP1 ver.1.56 INSTALLATION MANUAL rev.0
1
ORION ISS
EXECUTIVE RELAY MODULE
S2000-SP1
INSTALLATION MANUAL
This Installation Manual includes instructions on how to mount the S2000-SP1 Executive Relay
Module (hereinafter referred to as the module) and to prepare it for operation.
The description of the module and rules of setting up and operating this one can be found in
S2000-SP1 Instruction Manual (which is a part of the standard delivery and can also be
downloaded from the website of the Bolid Company at the address of
www.bolid.com
, in the
Products Section).
1 SAFETY PRECAUTIONS
-
There are no potential hazard circuits within the module.
-
Do SHUT OFF the device power before mounting, wiring, or maintaining the
module.
-
Mounting and maintaining the module MUST be performed by qualified engineers.
2 MOUNTING THE MODULE
2.1 The module is to be mounted within cabinets, on walls, or on other constructions within
premises closely to connected executive devices at places protected against atmospheric
fallouts, mechanical damage, and unauthorized access.
2.2 Wiring the module is performed in accordance with Figure 4.
