![background image](http://html1.mh-extra.com/html/eaton/crouse-hinds-ace10-series/crouse-hinds-ace10-series_installation-and-maintenance-information_3738394001.webp)
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF 1619
ACE10 Variable Frequency Drive System
Installation & Maintenance Information
IF 1619 • 05/18
Copyright
©
2018, Eaton’s Crouse-Hinds Division
Page 1
TABLE OF CONTENTS
1. Safety instructions
1.1 Approved applications
Page 2
1.2 Electrical safety
Page 2
1.3 Blower safety
Page 2
1.4 Hot surfaces
Page 2
1.5 Enclosure safety
Page 2
2. Mechanical installation
2.1 Airflow provisions - installation drawing
Page 3
2.2 Weights
Page 4
2.3 Lifting
Page 4
2.4 Dimensional drawings
Page 5
2.5 Mounting
Page 6
2.6 Shroud installation
Page 6
2.7 Pre-filter installation
Page 6
3. Electrical installation
3.1 Enclosure grounding - internal/external
Page 6
3.2 Line feed
Page 6
3.3 Load feed and shield grounding to drive
Page 6
3.4 Control wire routing
Page 6
3.5 Blower and signal schematic
Page 7
3.6 Communication modules
Page 8
4. General operation
4.1 Keypad interface
Page 8
4.2 Disconnect and lockout/tagout
Page 8
5. Maintenance
5.1 Drive maintenance
Page 9
5.2 Cooling system maintenance
Page 9
5.3 Periodic mechanical maintenance (torque verification,
pushbutton lubrication, window cleaning)
Page 9
5.4 Status indication - filter maintenance
Page 9
5.5 Explosive event required maintenance
Page 9
6. Technical data
6.1 Technical data chart
Page 10
6.2 Power loss (heat dissipation)
Page 10
6.3 De-rating factors and curves (ambient temperature,
altitude, switching frequency)
Page 10
7. Crouse-Hinds drive parameters
7.1 Parameter table
Page 10
8. Replacement parts
8.1 Pre-filter kit
Page 10
8.1.1 Pre-filter installation instructions
Page 10
8.2 Sintered filter kit
Page 11
8.2.1 Sintered filter installation instructions
Page 11
8.3 Blower kit
Page 11
8.3.1 Blower installation instructions
Page 11
8.4 Pushbutton operator kit
Page 12
8.4.1 Pushbutton installation instructions
Page 12
Control pad
assembly
Blower
cooling intake
Manifold
Blower
VFD
Disconnect
switch
Shroud
Control pad
viewing
window
Indicating
lights
Control pad
button
assembly
Disconnect
operating
handle
Explosionproof
filter
(pre-filters
removed for
clarity)
Warning plate
Warning plate
Product
nameplate
with critical
markings
Data nameplate
including torque
information
Internal
ground
External
ground
Designated space for
additional DIN rail mountable
terminals/relays
Baffle
Shrouds
Blower
fuse
block
(not
shown)