Test hub
UP
and
DOWN
position
before installing bracket.
Arm and Reverse Edge Note:
Arm (sold separately) has already been assembled when
using 2-piece arm. See page 5 for more information.
Reverse edge with/without LEDs (sold separately) has already
been installed on arm. See page 6 for more information.
Install Bracket
OCTAGON ARM REVERSE/LED EDGE INSTALLATION
Installation
DoorKing Part Number
1601-235
Octagon Arm Hardware Kit
DoorKing Part Number
1601-242
Arm Hardware Kit
This kit is designed
for a 1601 barrier gate operator
WITHOUT convenience open OR
1603 auto-spikes barrier operator
.
It
CANNOT
be used with a 1602 operator. The kit provides a reversing edge with OR /without Red/Green LEDs for a
octagon
arm. When the arm
is raised, LEDs turn
GREEN
, and turns
RED
when lowered and remains
RED
in the down position. Arm will reverse if lowering and a
obstruction is encountered.
Note: DO NOT
operate arm with a malfunctioning reverse edge.
Allow arm to protrude
about 1” past the end
of arm bracket. Make
sure arm cover fits
over arm.
When installing a octagon
arm
ONLY
.
Arm Bracket
Hub
Arm
Reverse Edge
Drawings NOT to scale
Octagon Arm
Reverse/LED Edge
Copyright 2019 DoorKing
®
, Inc. All rights reserved.
120 S. Glasgow Avenue
Inglewood, California 90301
U.S.A.
Hub
MUST
already be installed on gate operator.
See 1601 Installation/Owner’s manual for correct hub installation.
1
1601-268-B-12-19
