PARTS LIST:
ITEM
QTY
THREAD LOCK TUBE
1
SHOCK
1
BALL MOUNT PLATE
1
NUTSERT TOOL
1
BALL MOUNT
1
NUTSERT
1
TORX WRENCH
1
TOOLS REQUIRED:
T-50 TORX
M5 ALLEN WRENCH
TAPE MEASURE
10MM WRENCH
13MM WRENCH
DZ 43200
TAILGATE ASSIST
FORD F-150 2004-2011
13MM WRENCH
STEP 1)
STEP 2)
STEP 3)
Adjust the nutsert tool so
Using a M5 Allen wrench and
Mark one side of the nut and
Apply thread lock to the threads
there is 3/4" from the washer
a 10mm wrench, install the
count the number of revolutions
of the ball mount.
to the head of the bolt.
nutsert in the opening by the
to insure the correct number
Install the ball mount into the
tailgate pivot point.
of full turns.
nutsert using a 13mm
Overtightening the nutsert
wrench/socket.
can strip the threads and cause
the nutsert to be unusable.
Remove the nutsert tool
when installation is complete.
The nutsert should NOT be
tightened any more than 9
360 degree turns.
