RP32ML Issue 13 © 2014
Page 1 of 20
INST
R
UCTION MANUAL FOR ALL MODELS
(Excluding OXY-ACETYLENE and OXY-LPG)
Introduction
Thank you for purchasing a Macnaught Retracta Hose
Reel. This product is manufactured from the highest quality
materials and will provide many years of reliable service
when maintained and operated correctly. Your Retracta
Hose Reel has a guaranteed Spare Parts Availability for 10
years.
1 x Retracta Hose Reel.
1 x BU100 Mounting Bracket.
1 x Accessory Bag containing:
(Instruction Manual, Locking Bracket, Handle,
2 x 15mm screws, 1 x Metal Screw)
Other accessories may be included depending on model
IMPORTANT!
Please read this safety information carefully
and refer to the Parts Diagram before use.
Read and retain this instruction manual to assist you in
the correct installation, operation and maintenance of this
product.
Follow all safety instructions. Where ‘CAUTION!’ is
shown this signifies the risk of personal injury or damage
to property that may be caused by incorrect use of this
product.
Ensure that all operators are aware of the correct
operating and maintenance procedures for this product.
DO NOT attempt to open the drum assembly (item 5) for
any reason. If the spring is damaged a new drum assem-
bly must be installed.
DO NOT exceed the maximum working pressure shown on
the product label.
DO NOT use this product for any other purpose than as
shown on the product label or modify this product in any
way.
ALWAYS use genuine Retracta spare parts when
maintaining this product.
A) Using 2 x 15mm screws (supplied) attach the carrying
handle to the top of the reel.
B) The BU100 mounting bracket (supplied) is suitable for
installing the reel up to 1.8mtrs high on a wall or up to
4.5mtrs overhead (see Figures 1 and 2). This bracket al-
lows the reel to swivel in the direction of use. To prevent
the reel from swiveling in the overhead position (figure 2)
only install the locking bracket RB9 (supplied).
C) Use the optional BB100 bracket to install the reel be-
tween 1.8mtrs and 4.5mtrs on a wall or on a bench/floor
(see figures 3 and 4).
D) Fix the mounting bracket in the desired location using
appropriate fixings (not supplied).
E) BU100 – remove the pin from the bracket, mount the
reel onto the bracket and insert the pin to secure the reel.
F) BB100 – Remove the upper collar by loosening the
screw, mount the reel onto the bracket, refit the collar and
secure with the screw.
H) The connecting hose should allow the reel to swivel
freely on the bracket.
G) Use the 8mm screw provided to secure the pin on the
BU100 bracket and prevent accidental removal. A padlock
(not supplied) can be fitted for additional security on both
brackets.
Installation Procedure
Fig.1 BU100 - Wall
Fig.2 BU100 - Overhead
Fig.3 BB100 - Floor/Bench
Fig.4 BB100 - High Wall
Auto-Rewind Hose Reels
Carton Contents
Includes m odels
AB100 (AB2101), AR100 (AR2101)
AR200 (AR2121), AW100 (AW2101)
AW150 (AW2150), AW200 (AW2121)
CW100 (CW2121), DR100 (DR2121)
FG100 (FG2106), GR100 (GR2061)
HW100 (HW2121), HWP100 (HWP2101)
OLP100 (OLP2121), OMP100 (OMP2101)
WP100 (WP2101)
