INSTRUCTION MANUAL
Installation
1: Checking before installation (There
’
s electricity in the solar lighting when you receive, need to check if it
works before installation)
-- Connect the light and solar panel, put solar panel to the place with bright lighting, led light
’
s off, cover solar
panel and light
’
s on, that shows the lighting sensor of solar panel and the light are working.
-- Stand 5 meters far from the lighting and put
“
on
”
and
“
off
”
towards the light to check the remote using.
2: Installation of solar panel
a, place solar panel on the roof (recommand way)
b, put solar panel on the wall
-- Fix the stand and solar panel first
-- Fasten the solar panel on the wall with the expansion screws and make it in an angel of about 45°up to the
sky, make it clear without any covers
3: Installation of led lighting
-- Fasten the led light on the wall with the expansion screws
-- Adjust the angle with your actual situation
4, Connect male and female connector and screw the waterproof cover, installation completed.
5, Check after installation if everything fastened and worked.
