![background image](http://html.mh-extra.com/html/cooper-lighting/iris-rpn3mr/iris-rpn3mr_specification-sheet_2664051001.webp)
Energy Data
120V Input
Lamp
Input Operating
Watts Watts Current
20
23
.19
35
41
.34
37
42
.35
42
47
.39
50
57
.48
C A T A L O G # :
T Y P E :
ADI042553
MR16
Downlight
Reflector
C = Clear
H = Haze
G = Gold
B = Black
WMH = Warm Haze
W = Gloss White
MW = Matte White
Custom
K = Cognac
KH = Cognac Haze
CC = Chocolate
CCH = Chocolate
Haze
BU = Blush
BUH = Blush Haze
GP = Graphite
GPH = Graphite
Haze
PN = Pine
PNH = Pine Haze
SK = Sky Lens
SKH = Sky Haze
Complete unit consists of a platform and element
RPN3MR = 3"
Remodel Non-
IC Housing
E3MR = 3”
F i n i s h
O p t i c a l
E l e m e n t
A p e r t u r e
3 " D O W N L I G H T
For additional options please consult factory.
3 1/2"
[89mm]
4 3/8"
[112mm]
. . . Re fl e ct or
.040 thick aluminum spun parabolic reflector in
Clear, Gold, Haze, Warm haze and Black Alzak® finish
or painted gloss white. Special cone colors listed
below.
. . . Fl ange
Self flange reflector or die-cast flange with either
matte white or clear coat finish
Die-cast flanges are
easily removed for field painting. Elements
are keyed for proper insertion.
. . . L ens
Soft focus lens standard for smooth beam
patterns. Up to two filter media can be used
which are retained during relamping.
. . . At ta chme nt
Positive torsion springs pull flange tight to ceiling.
Mechanical light trap eliminates spill light at edge of
flange or reflector.
. . . Fr a me
Hot-dipped galvanized 20-gauge steel frame with
integral 1/2" plaster lip. Hole is sized for a 4-1/2" hole
saw for precise, clean installations. Ceiling clip retains
frame during insertion of housing.
. . . Hous ing
One-piece steel housing allows for heat dissipation.
Housing interior is matte black to provide a visually
dark interior. Easy-Lock Cams quickly and easily lock
to securely retain housing into the ceilings from 1/2"
to 1 1/2" thick.
. . . Soc ke t
GX5.3 base for Bi-pin MR16 lamps.
. . . T ra ns forme r
Truvolt toroidal transformer with dual-input taps for
proper 12.0V operation and quiet operation when
dimmed. Dimmer tap compensates for inherent volt-
age loss from dimmers, resulting in 30% more lumens
than traditional laminated transformers. Toroidal
design, with 90% or greater efficiency, features a
rolled one-piece continuous core of M3 grade grain
oriented silicon steel complete with an integral thermal
to protect against overheating. For dimming, use dim-
mers rated for electromagnetic transformers.
Transformer is warranted for 5 years and is service-
able from below ceiling.
. . . Junc ti on Box
Listed for 6#14 AWG 90° C conductors, has six 1/2"
pryouts.
C o d es
Thermally protected, IP labeled. Insulation must be
kept 3" away from sides and top of platform. Unit is
listed for below-ceiling accessibility for components
and inspection.
L ab e l s
U.L. and cUL listed, C.S.A.-certified, IBEW union
made. Installation instructions included with every
unit.
5 1/8" [130mm]
4 1/2"
[114mm]
Blank= White
die-cast
RAW= Natural
Die-cast
F l a n g e
LSPD = Spread Lens
LLNR = Linear Spread Lens
LUV = UV Reduction Lens
LLPINK = Light Pink Lens
LLSTRAW = Light Straw Lens
L27K = 2700K dichroic filter
LDAY = Daylight Lens
LSPINK = Surprise Pink Lens
LPLAV = Pale Lavender Lens
LHEX= Hex Cell Louver
A c c e s s o r i e s
Specification grade 50 watt MR16 downlight fix-
ture for installation through existing ceilings.
Fixture fits into tight 2" x 6" joist construction
areas and from 1/2" to 1 1/2" ceiling thicknesses.
The 50° cutoff to lamp provides a glare free,
smooth distribution of light. For use with all halo-
gen MR16 lamps in either open or cover glass vari-
eties. Optical element can be changed after instal-
lation to provide a variety of distributions.
Insulation must be kept 3" away from sides and
top of fixture.
Note: O.D. of SF
is 4 7/8”