Retro Fit Barrier Kit
Barrier Kit for Ladder Models #6000, #6100, #7000 and #7100
Parts List
4 - #10 x 1-1/4” Sheet Metal Screw
1 – Upper Brace
1 – Lower Base
1 – Small Barrier Section
1 – Large Barrier Section
1 – Strip of 4 Foam Pads
Ladder must be assembled according to Instructions before installing Barrier Kit. Ladder must be
removed from Swimming Pool before installing Barrier Kit.
1.
Snap Small and Large Barrier Sections into slots
on Lower Base as shown.
2.
Separate Barrier sections at the top slightly and position Upper Brace over Small Barrier
Section. Next, spread the “fingers” on the Upper Brace and slide into position on the Large
Barrier Section.
See other side
