REV. 02/26/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on step and closure.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
Required tools
(not included)
A
1)
Insert the two gussets in the slots and slide them
toward the corners.
2)
Assemble the two main modules with the six screws,
nuts and washers provided.
3)
Snap the door between the top and bottom module
within the slots provided.
Sand
(not included)
Sand
5 lbs
x6 x6 x6
A B C
AQUARIUS 5010 WITH CLASSIC LADDER 6003
Contents of
Aquarius box SKU # 5010
Contents of
Classic Ladder box SKU # 6003
A weather-resistant padlock
is recommended.
MAXIMUM functional
width is 1/4’’.
WARNING
Install the step on a flat surface.
Do not jump or dive from the step or ladder.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
2X
GUSSET
INSERT NUT
Phillips #2
Phillips #3
7/16 wrench
Phillips bit
Security straps
x2
x2
x2 x2
(3/4 IN.)
x18
2 1/2 IN.)
x2
SCREW BAG 140-0058
(1 IN.)
G
A
D B C
x2
x2
x2
x2
3/8 drill bit
Required part
(not included)
IN ORDER TO INSTALL THE AQUARIUS 5010 WITH THE CLASSIC LADDER 6003, YOU WILL NEED TO PURCHASE
THIS PART:
35” PVC post
,
TO REPLACE THE SHORT POST IN THE 5010 BOX.
SKU # 165-0013
x2
x4
x2
(3/4 IN.)
x4
D
SCREW KIT 140-0028
x6 x6 x6
(1 IN.)
(1
¹⁄2
IN.)
(
³⁄4
IN.)
x2
(
³⁄4
IN.)
x17
x12
A B C D E F
SCREW KIT 140-0010
Contents of
“Riser kit” box
x2
x1
x2
x2
x3
x1
x2
x2
x1
