Speaker Mount Assembly
(PAC-300)
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to the PAC-300, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install or operate the unit. Pay particular atten-
tion to the “Important Precautions” on Page 1.
•
The maximum weight to be installed on the PAC-300 is limited by the weight specification of mount.
•
If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480.
I N S T R U C T I O N M A N U A L
The Speaker Mount Assembly (PAC-300) is designed to
fit up to most 50” screens. The mount attaches to the
center of the speaker, adding only about one inch to the
depth of the mount and 20 pounds to the weight.
Height adjust ability of the mount is two inches, one inch
up and one inch down, from the center in one-half inch
increments.
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY STE. 700
SAVAGE, MINNESOTA 55378 USA
PART NO. 8800-000029 (Rev. B)
©
2004 Chief Manufacturing
www.chiefmfg.com
Printed in USA 05-04
