Merchant services are provided by Paymentech, LLC (“Chase”), a subsidiary of JPMorgan Chase Bank, N.A.
©2020 JPMorgan Chase & Co
Setup Guide
Verifone V400m
Setting up and connecting
your card reader requires
just a few steps.
1.
You should have already unpacked your card reader and activated your reader in the Chase
Merchant Center. If not, visit
Important: Your card reader should remain unplugged and powered off until you’ve
completed activating your device in the Chase Merchant Center.
2.
Connect the Power cable
The card reader contains a battery that is designed to operate without being connected to
electrical power for several hours. Once the battery status icon on the card reader’s
screen indicates that the battery charge level is low, the card reader must be connected
to electrical power and be fully recharged prior to using again without electric power. See
diagram below.
