background image

Garage Door Opener

Owner's Manual

FOR RESIDENTIAL USE ONLY

CONTENTS

PAGE CONTENTS

PAGE

Safety Rules......................................................2      Force Adjustments... ......................................... 21
Features of Your Opener ..................................3

Safety Reverse Test.. .......................................... 22

Specifications ...................................................3

The Protector System Accessory....................... 22

Tools You’ll Need..............................................3

Setting/Changing Code....................................... 23

Completed Installation Illustrations.................4

Having a Problem?.... ......................................... 24

Operation of Your Opener ................................5

Carton Contents & Hardware Illustrated ............ 26

Accessories ......................................................5

Repair Parts, Rail Assembly............................... 26

Care and Maintenance of Your Opener............6

Repair Parts, Installation .................................... 26

Assembly Instructions .....................................7

Repair Parts, Chassis Assembly ........................ 27

Installation Instructions ...................................10 How to Order Repair Parts ................................. 28
Travel Limit Adjustments .................................20   Warranty ...............................................................28

                   FASTEN THIS MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.
    PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO INSURE SATISFACTORY OPERATION.

CAUTION PLEASE READ THIS MANUAL CAREFULLY

The MODEL NUMBER is located on the front panel of your opener.

MODELS- -- SERIES 5000 -- 1/2HP

--2610-491 -- 1/2HP

MODELS 

-- SERIES 4000 -- 1/2HP

         

-- SERIES 3000 -- 1/3HP
-- 2610-482 -- 1/3HP

MODEL SERIES 2000 -- 1/3HP

Summary of Contents for Series 2000 1/3HP










Reviews: