F19
Fitting batteries:
Battery: 2 X AAA - Alkaline or NiMH
1. Make sure flashlight is off and unscrew the tail cap (A).
2. Remove old batteries and install new batteries with the positive pole pointing forward (toward the flashlight head).
Care to install the batteries as described as failure to do this may cause damage to the flashlight.
3. Screw the tail cap back into place. The flashlight is now ready for use.
Charge the flashlight:
1. Push the charging port cover
2. Plug the Micro USB end into the charging port of the flashlight.
Plug the USB end into a power source such as a computer,
power bank charging, USB wall socket adapter or USB car charger.
3. LED battery indicator light
Tail cap (A)
Unscrew tail cap
anti-clockwise to
change batteries
USER MANUAL
Operation:
Full Pressing (B)
Light on (100%) -> Light off -> Light on (33%)
Half Pressing (B)
Light on when half pressing, light off when release
When the battery is low, the flashlight will slow flash every 3 seconds after turn on (100%).
Flashing Green
Charging in progress
Solid Green
Charging Completed
Features:
- Light modes: 2 - High / Low
- Focus: Slider Focusing
- Built-in USB rechargeable design
- Body: durable aircraft grade aluminum with hard wearing
anodized protective coating
- Polarity protection and PWM regulation for accurate
light output
- Handy pocket clip and anti-roll
Main switch(B)
Focusable
Head
Clip
