Quick guide
Convert a Maglite Magcharger with original glow-bulb to a LEDMAG P7 V2 led upgrade in
10 steps.
If you run into any problems please check the extended video for help. Do not try to force anything, this may
permanently damage the Flashlight or led.
Taking the flashlight apart is also a good chance to clean the glass lens and lubricate all treads, rings, rubbers and
connections. Clean the Glass Lens in warm water with some washing up liquid.
Do not touch the inside of the reflector! Dust and fingerprints will be very hard to remove without damaging the
reflective surface.
Parts of the Maglite Magcharger flashlight:
1.
Tailcap
2.
O-ring Tailcap
3.
Spare bulb in foam
4.
Spring
5.
Barrel with Battery
6.
Center Housing
7.
O-ring Housing
8.
Nylon Washer
9.
Switch assembly with Switch.
10.
Switch Seal
11.
Charging Module
12.
Head
13.
O-ring Head
14.
Reflector
15.
Glass Lens
16.
Glass Lens Seal
17.
Face Cap
Parts of the LED upgrade:
18.
Switch-barrel aluminum
19.
LED module with reflector
18.
19.
