![background image](http://html1.mh-extra.com/html/balmar/max-charge-mc-614-h/max-charge-mc-614-h_installation-and-operation-manual_3603451001.webp)
1
www.balmar.net / Customer Service: +1 (360) 435-6100 x1 / Technical Support: +1 (360) 435-6100 x3
Tech Service is available Monday - Friday (8:30am - 7:30pm EST)
INSTALLATION AND OPERATION MANUAL
Introduction
The Balmar Max Charge MC-614
is the latest generation of
smart, multi-stage Balmar Max Charge voltage regulators.
Designed to provide precise voltage control for Balmar’s
high-output 12-volt alternators and other externally regulated P-type
alternators, the MC-614 features user selectable programs for the
following battery types: Deep cycle flooded, standard flooded, gel,
AGM, spiral wound AGM, and LiFePO
4
batteries. The regulator
also features a universal default program that’s designed for use in
vessels utilizing voltage sensitive halogen equipment.
In addition to the user selectable preset programs, the MC-614
features a wealth of advanced programming modes which make it
possible to tailor charging to a wide variety of environments.
When used in conjunction with optional MC-TS-A and
MC-TS-B alternator and battery temperature sensors, the MC-614
features the ability to monitor and respond to a range of ambient
temperature conditions, including reduction or discontinuation
of charging voltages, should a catastrophic over-temperature
condition occur at the alternator or the batteries.
Safety Considerations
1. Always disconnect your battery banks
and ensure that switches are “OFF” prior
to installing your regulator.
2. Remove loose-fitting clothing or jewelry,
which could become entangled in
your motor or other machinery prior to
installing regulator.
3. Wear ANSI-approved safety eye-wear
and protective gear.
4. DO NOT attempt to modify the regulator.
Modifications could result in damage to
your charging system, and will void your
warranty.
5. DO NOT attempt installation if you are
tired or fatigued.
6. Ensure that the engine has cooled before
initiating installation.
7. DO NOT attempt regulator installation
while using alcohol or medication that
could impair your judgment or reaction
time.
8. Always use the right tool for the job.
Improper tool use may damage regulator
or your vessel, and could result in
personal injury.
9. Take time to read the manual. Equipment
damage and possible injuries may result
from an incomplete understanding of
the installation and operation of the
MC-614 regulator. If you are unfamiliar
with marine electrical systems, consult
with a licensed marine electrician.
MAX CHARGE MC-614
MULTI-STAGE
VOLTAGE REGULATOR
©2017 Balmar LLC SUP-0201 REV.C 12/12/17
Introduction
1
Basic Programming
10
Safety Considerations
1
Adjust For Battery Type
10
Regulator Installation
2
LiFePO
4
11
Unpacking Box
2
Belt Load Manager
12
Locate/Mount Regulator
2
Display Mode
12
Basic Wiring Installation
2
Alt. Failure Advisory
12
Regulator Terminal Layout
3
Programming Flow Chart
13
Installation By Wire
4-6 Adv. Programming
14-15
Initial Start Up
6
Battery Equalization
16
Regulator Operation
7
Default Program Settings
16
Programming Display Modes
8
Add’l. Regulator Features
16
Regulator Programming
10 Troubleshooting
17-18
Using Magnetic Tool
10 Warranty
19
Table of Contents