background image

XS Series Retail System Scales 

Operator Instructions

ABR35-000606   issue AA

©

Avery Berkel, 2015 All rights reserved

No part of this publication may be reproduced, stored in an electronic retrieval system, or transmitted in any form or by any means, 
electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as 
permitted by law or under licence. Full acknowledgment of the source must be given. Avery Berkel is a division of ITW Limited. This 
publication was correct at the time of going to print and is supplied without liability for errors or omissions. Avery Berkel reserves the 
right to alter without notice the specification or design of any product or service at any time.

Trademarks and acknowledgements

Avery Berkel is a registered trademark in certain jurisdictions. All brands and product names used within this document are trademarks 
or registered trademarks of their respective holders

IMPORTANT

When programming or configuring the equipment you must ensure that you comply with all relevant standards and legislation. The 
example settings given in this book may not be legal for trade with the public.

Summary of Contents for XS 100






















































Reviews: