![background image](http://html.mh-extra.com/html/zyxel-communications/zyxel-prestige-202/zyxel-prestige-202_user-manual_943545097.webp)
Prestige 202 ISDN Router
Dial-in Server Configuration
6-5
FIELD
DESCRIPTION
OPTIONS
O/G Password
Enter in the outgoing password to be used to respond to
the peer’s authentication request.
Multiple Link Options:
Max Trans Rate(Kbps)
Enter the maximum data transfer rate between your
Prestige and the remote dial-in user.
64
–
At most, one B
channel is used.
128
–
A maximum of two channels can
be used. When the Prestige calls back to the remote
dial-in user, the maximum data transfer rate is always
64.
64/128
Callback Budget
Management:
Allocated Budget (min)
This field sets the budget callback time for all the remote
dial-in users. The default for this field is
0
for no budget
control.
0
(default)
Period (hr)
This field sets the time interval to reset the above
callback budget control.
IP Address Supplied By:
Dial-in User
If set to
Yes
, the Prestige will allow a remote host to
specify its own IP address.
If set to
No
, the remote host must use the IP address
assigned by your Prestige from the IP pool, configured
below. This is to prevent the remote host from using an
invalid IP address and potentially disrupting the whole
network.
Yes
(default)
IP Pool
This field tells your Prestige to provide the remote host
with an IP address from the pool. This field is required if
Dial-In IP Address Supplied By: Dial-in User
is set to
No
. You can configure this field even if Dial-in User is set
to
Yes
, in which case your Prestige will accept the IP
address if the remote peer specifies one; otherwise, an
IP address is assigned from the pool.
Yes/
No
(default)
IP Pool: IP Start Addr
This field is applicable only if you selected
Yes
in the
Dial-In IP Address Supplied By: IP Pool field.
The IP pool contains contiguous IP addresses and this
field specifies the first one in the pool. The IP start
address is the start of a series of consecutive IP
addresses.
In this field, enter the number (
1
or
2
) of addresses in the
IP Pool. For example, if the starting address is
192.168.135.5 and the count is 2, then the pool will have
Summary of Contents for ZyXEL Prestige 202
